FP222WHの取扱説明書・マニュアル [全38ページ 0.89MB]
5
33 How to adjust your monitor*HDMI, short for High Definition Multimedia Inte rface, is the first indust ry-supported, uncompressed, all-digital audio/video interface between audio/vide o sources and audio and/or video monitors. Being different from other connectors, an HDMI connector can carry both video and audio signals via the same cable and transfer uncompressed digital audio and vid eo for the highest image quality. It supports digital televisions (DTV), set-top boxes, DVD players, and DVD recorders, etc. The HDMI connector on your FP222W H supports video source only. *DDC/CI, short for Display Data C hannel/Command Inte rface, which was developed by Video Electronics Standards Association (VESA). DDC/CI capability allows monito r controls to be sent via the software for remote diagnostics.V. Position Adjusts the vertical position of the OSD menu.Press the t or u keys to change the settings.0 to 100Display Time Adjusts the display time of the OSD menu.Press the t or u keys to change the settings.* 5 Sec.* 10 Sec.* 15 Sec.* 20 Sec.* 25 Sec.* 30 Sec.OSD Lock Prevents all the monitor settings from being accidentally changed. When this function is activated, the OSD controls and hotkey operations will be disabled.Press the t or u keys to change the settings.To unlock the OSD controls when the OSD is preset to be locked, press and hold the 'MENU' button for 15 seconds to enter the 'OSD Lock' option and make changes. Alternatively, you may use the t or u keys to select 'OFF' in the 'OSD Lock' submenu from the 'OSD Settings' menu, and all OSD controls will be accessible.* ON* OFFPress MENU to leave the OSD Settings menu.DDC/CI* Allows the monitor settings to be set through the software on the PC.Press the ENTER key to select this option. Press the t or u keys to change the settings.* ON* OFFInformation Displays the current monitor property settings.Press the ENTER key to select this option.Reset All Resets all mode, color and geometry settings to the factory default values.Press the t or u keys to change the settings.* Yes* No
