M2700HDの取扱説明書・マニュアル [全42ページ 3.51MB]
4
10 / 42 ページ
10 / 42 ページ
現在のページURL
10 How to assemble your monitor hardware 4. How to assemble your monitor hardwareIf the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base.Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls. Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding.Gently lay the screen face down on a flat clean padded surface.While holding the monitor firmly against the desk, pull the monitor stand arm upwards clear of the monitor.Orient and align the stand base socket with the end of the stand arm, then push them together. Tighten the screws on the bottom of the monitor base (using the provided screwdriver) as illustrated. Use the provided screwdriver to tighten or remove screws only. Misuse of the screwdriver may cause serious personal injuries or possible damage to the product.Gently attempt to pull them back apart to check that they have properly engaged.Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
参考になったと評価 
29人が参考になったと評価しています。
このマニュアルの目次
-
2 .CopyrightCopyright (C) 20...CopyrightCopyright (C) 2011 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, ...
-
3 .Table of ContentsCopyrigh...Table of ContentsCopyright ..........................................................................................................................2Disclaimer ..................................................................................................
-
4 .4 Getting started 1. Ge...4 Getting started 1. Getting startedWhen unpacking please check you have the follow ing items. If any are missing or damaged, please contact the place of purchase for a replacement. BenQ LCD MonitorMonitor BaseQuick Start Guide CD-ROM Remote ControlScrew...
-
5 .5 Getting startedPowe...5 Getting startedPower Cord(Picture may differ from product supplied for your region.)Video Cable: D-Sub Audio CableUSB Cable Video Cable: DVI-D Video Cable: HDMIVideo Cable: Component(Optional accessory for models with Component inputs, sold separatel...
-
6 .6 Getting started Consi...6 Getting started Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.Always keep the product and accessories out...
-
7 .7 Getting to know you...7 Getting to know your monitor2. Getting to know your monitorFront viewBack view Above diagram may vary depending on the model.1. Control buttons2. Power button3. Remote control sensor4. Speakers5. Headphone jack6. USB port x 2 (downstream; connecting ...
-
8 .8 Getting to know the re...8 Getting to know the remote control 3. Getting to know the remote controlFront viewOSD = On Screen Display.1. Power button Turns the power on or off.2. Audio mode button Switches to different audio modes.3. Mute button Mutes the volume.4. Navigation but...
-
9 .9 Getting to know the...9 Getting to know the remote controlInstalling the battery1. Turn over the remote control. Press the latch at the bottom of the remote control to the right, and while holding the latch, pull the battery holder out. 2. Place a 3V Lithium cell battery pu...
-
10 .10 How to assemble your ...10 How to assemble your monitor hardware 4. How to assemble your monitor hardwareIf the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base...
-
11 .11 How to assemble yo...11 How to assemble your monitor hardwareAlways move or angle the monitor by holding both left and right sides (Figure I), or the top of the screen and the monitor stand (Figure II). Holding the bottom of the screen (Figure III) is prohibited as the bot...
-
12 .12 How to assemble your ...12 How to assemble your monitor hardware 2. Connect the video cable.To Connect the D-Sub CableConnect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the...
-
13 .13 How to assemble yo...13 How to assemble your monitor hardwareTo Connect the Composite CableConnect the yellow plug of the Composite cable to the Composite video input on the monitor.Connect the other end of the cable to the Composite port of the video output device.Connect...
-
14 .14 How to assemble your ...14 How to assemble your monitor hardware To Output Audio SignalsYou are provided with the following options to output audio from the monitor:* You may connect headphones to the headphone jack found on the left side of the monitor. See picture on the righ...
-
15 .15 How to assemble yo...15 How to assemble your monitor hardwareII. Connect USB devices via other USB ports (downstream) on the monitor. These downstream USB ports transmit data between connected USB devices and the upstream port. See picture on the right.III. You can plug 2 ...
-
16 .16 How to assemble your ...16 How to assemble your monitor hardware 7. Connect-to and turn-on the power.Plug the other end of the power cord into a power outlet and turn it on.Picture may differ from product supplied for your region.Turn on the monitor by pressing the power button...
-
17 .17 How to assemble yo...17 How to assemble your monitor hardwareHow to detach the stand base1. Prepare the monitor and area.Turn off the monitor and the power before unplugging the power cable. Turn off the computer before unplugging the monitor signal cable.Protect the monit...
-
18 .18 Getting the most from...18 Getting the most from your BenQ monitor 5. Getting the most from your BenQ monitorTo gain the most benefit from your new BenQ color LCD flat screen monitor, you should install the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Mon...
-
19 .19 Getting the most f...19 Getting the most from your BenQ monitorHow to install the monitor on a new computerThis instruction details the procedure for select ing and installing the BenQ LCD Monitor driver software on a new computer which has never had a monitor driver insta...
-
20 .20 Getting the most from...20 Getting the most from your BenQ monitor How to upgrade the monitor on an existing computerThis instruction details the procedure for manual ly updating the existing monitor driver software on your Microsoft Windows computer. It is cu rrently tested as...
-
21 .21 Getting the most f...21 Getting the most from your BenQ monitorHow to install on Windows 7 system1. Open Display Properties .Go to Start , Control Panel, Hardware and Sound, Devices and Printers and right-click the name of your monitor from the menu.Alternatively, righ...
-
22 .22 Getting the most from...22 Getting the most from your BenQ monitor How to install on Windows Vista systems1. Open Display Settings .Right-click the desktop and select Personalize from the popup menu.Select Display Settings from the Personalize appearance and sounds window....
-
23 .23 Getting the most f...23 Getting the most from your BenQ monitorHow to install on Windows XP system1. Open Display Properties .The quickest shortcut to Display Properties is through the Windows desktop. Right-click the desktop and select Properties from the popup menu.Alte...
-
24 .24 Picture optimization ...24 Picture optimization 6. Picture optimizationThe easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AUTO key function. Press the AUTO key to optimize the currently displayed image to the screen. When you connect a di...
-
25 .25 How to adjust your...25 How to adjust your monitor7. How to adjust your monitorThe control panel1. AUTO : Adjusts vertical position, phase, horizontal position and pixel clock automatically.2.MENU key: Activates OSD main menu and return to the previous menu or exit OSD.3....
-
26 .26 How to adjust your mo...26 How to adjust your monitor Hot key modeThe monitor keys perform as hot keys to provide direct access to particular functions whenever the menu isn't currently displaying on-screen.Volume hot keysMode hot keyInput hot key (not available for analog-onl...
-
27 .27 How to adjust your...27 How to adjust your monitorMain menu modeYou can use the OSD (On Screen Display) menu to adjust all the settings on your monitor. Press the MENU key to display the following main OSD menu. The OSD menu languages may differ from the product supplied...
-
28 .28 How to adjust your mo...28 How to adjust your monitor Display menu1. Press the MENU key to display the main menu.2. Press the or keys to select DISPLAY and then press the ENTER key to enter the menu.3. Press the or keys to move the highlight to a menu item and then p...
-
29 .29 How to adjust your...29 How to adjust your monitorH. Position Adjusts the horizontal position of the screen image. Press the or keys to adjust the value.0 to 100V. Position Adjusts the vertical position of the screen image.0 to 100Pixel Clock Adjusts the pixel clock fr...
-
30 .30 How to adjust your mo...30 How to adjust your monitor Picture menu1. Press the MENU key to display the main menu.2. Press the or keys to select PICTURE and then press the ENTER key to enter the menu.3. Press the or keys to move the highlight to a menu item and then p...
-
31 .31 How to adjust your...31 How to adjust your monitorColor - Press ENTER to enter the Color menuThis Color menu is available only in the Standard mode.Normal Allows video and still photographs to be viewed with natural coloring. This is the factory default color. Press the...
-
32 .32 How to adjust your mo...32 How to adjust your monitor Picture Advanced menu1. Press the MENU key to display the main menu.2. Press the or keys to select PICTURE ADVANCED and then press the ENTER key to enter the menu.3. Press the or keys to move the highlight to a me...
-
33 .33 How to adjust your...33 How to adjust your monitorSenseye Demo Displays the preview of screen images under the selected mode from Picture Mode. The screen will be divided into two windows; the left window demonstrates images of Standard mode, while the right window present...
-
34 .34 How to adjust your mo...34 How to adjust your monitor HDMI RGB PC Range(available only when HDMI input is in use)Determines the range of color scales. Select an option that matches the RGB range setting on the connected HDMI device.Press the ENTER key to select this option. Pr...
-
35 .35 How to adjust your...35 How to adjust your monitorAudio menu1. Press the MENU key to display the main menu.2. Press the or keys to select AUDIO and then press the ENTER key to enter the menu.3. Press the or keys to move the highlight to a menu item and then press...
-
36 .36 How to adjust your mo...36 How to adjust your monitor EmbracingSound Turns EmbracingSound(R) on or off. The EmbracingSound(R) technology enhances the sounds output from the monitor.Press the or keys to change the settings.* ON* OFF (both Audio Mode and Audio Advanced menus ...
-
37 .37 How to adjust your...37 How to adjust your monitorSystem menu1. Press the MENU key to display the main menu.2. Press the or keys to select SYSTEM and then press the ENTER key to enter the menu.3. Press the or keys to move the highlight to a menu item and then pre...
-
38 .38 How to adjust your mo...38 How to adjust your monitor OSD Settings - Press ENTER to enter the OSD Settings menu.Language Sets the OSD menu language.Press the or keys to change the settings. The language options displayed on your OSD may differ from those shown on the r...
-
39 .39 How to adjust your...39 How to adjust your monitor*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for remote diagnostics....
-
40 .40 Troubleshooting 8. Tr...40 Troubleshooting 8. TroubleshootingFrequently asked questions (FAQ)The image is blurred:Read the instructions on the link " Adjusting the Screen Resolution" on the CD, and then select the correct resolution, refresh rate and make adjustments based on th...
-
41 .41 TroubleshootingIs ...41 TroubleshootingIs the prompt on the display illuminated in orange?If the LED is illuminated in orange, the power ma nagement mode is active. Press any button on the computer keyboard or move the mouse. If that does not help, check the signal cable ...
-
42 .42 Troubleshooting USB d...42 Troubleshooting USB devices are not working:•Check whether upstream and downstream USB are properly connected.•Install a corresponding USB device driver if available.Need more help?If your problems remain after checking this manual, please contact your...
