Bin emptying and brushbarIf ratchet warning noise continues, stopvacuuming, turn off the machine andunplug. To free the brushbar, lie themachine on its front to reveal the soleplate.1234Using a coin, undo the three yellowfasteners.Push bin release catch forward to freethe bin.Wrap a plastic bag firmly around therim of the clear bin and empty (waitten seconds to allow dust to settle).To clean bin, wash in warm water. Donot remove bin inner and seals, andensure bin is dry before reassembling. 34Push Cyclone release catch forward tofree Cyclone assembly.Pull Cyclone assembly away from themachine.1To replace brushbar, align and locatein slots. Rotate until the end caps clickinto place. Rotate brushbar to allow beltto centralise, then replace soleplate.51231234Do not fill bin above maximum line. 45Keep small holesclear of dust and fluff.2OptionalDYSON CUSTOMER HELPLINE: 0990 2751048am to 8pm, 7 days a weekIf the brushbar is obstructed, a loud ratchet warning noise will be heard. Pull the cleaner away and it will automatically re-s et itself.For thread removal, unplug cleaner and carefully cut away threads from brushbar.End cap of brushbarRaised sectionRemove soleplate and clear thebrushbar obstruction.
