Inspiron Zinoの取扱説明書・マニュアル [全53ページ 1.08MB]
inspiron-zino_Service%20Manual_en-us.pdf
ftp://ftp.dell.com/.../inspiron-zino_Service%20Manual_en-us.pdf - 1.08MB
- キャッシュ
8934view
53page / 1.08MB
Back to Contents Page I/O BezelDell™ Inspiron™ 300/400 Service Manual Removing the I/O Bezel Replacing the I/O BezelWARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer). Removing the I/O Bezel1. Follow the procedures in Before You Begin.2. Remove the top cover (see Removing the Top Cover).3. Remove the bottom cover (see Removing the Bottom Cover).4. Press and release the tabs on the bottom of the I/O bezel from the slots on the chassis and lift the I/O bezel out of the computer.1tabs (3)2I/O bezel Replacing the I/O Bezel1. Follow the procedures in Before You Begin.2. Align the tabs on the I/O bezel with the slots on the computer and snap into place.3. Replace the bottom cover (see Replacing the Bottom Cover).4. Replace the top cover (see Replacing the Top Cover). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.5. Connect your computer and all attached devices to electrical outlets, and turn them on.
参考になったと評価
2人が参考になったと評価しています。