Inspiron Zinoの取扱説明書・マニュアル [全53ページ 1.08MB]
inspiron-zino_Service%20Manual_en-us.pdf
ftp://ftp.dell.com/.../inspiron-zino_Service%20Manual_en-us.pdf - 1.08MB
- キャッシュ
9158view
53page / 1.08MB
Back to Contents Page I/O BracketDell™ Inspiron™ 300/400 Service Manual Removing the I/O Bracket Replacing the I/O BracketWARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety bestpractices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metalsurface (such as a connector on your computer). Removing the I/O Bracket1. Follow the procedures in Before You Begin.2. Remove the top cover (see Removing the Top Cover).3. Remove the top bracket (see Removing the Top Bracket).4. Remove the I/O bezel (see Removing the I/O Bezel).5. Remove the chassis fan (see Removing the Chassis Fan).6. Using a hex nut driver, remove the two screws that secure the VGA connector to the I/O bracket.7. Remove the screw that secures the I/O bracket to the chassis.8. Carefully press and release the security lock latch on the I/O bracket out of the computer cover and lift the I/O bracket out of the computer.1screw2hex nut screws (2)3I/O bracket4security lock latch Replacing the I/O Bracket1. Follow the procedures in Before You Begin.2. Slide the tabs on the bottom of the I/O bracket into the slots on the chassis.3. Carefully press and slide the security lock latch into place. Replace the screw that secures the I/O bracket to the chassis.
参考になったと評価
2人が参考になったと評価しています。