Lenovo  ノートパソコンの取扱説明書・マニュアル [全176ページ 2.44MB]
	 
	
	
	
	
		
			
				
				
					45n4575.pdf
					
					
					Gizbot 2013-09-10
					http://download.lenovo.com/.../45n4575.pdf - 2.44MB 
 - キャッシュ
						7990view
					
					176page / 2.44MB
					
					
				 
				
			 
		 
	 
 
	 
 
	
	
	
		
		
	
	
	
	Once  an  HDD  password  is  set,  you  need  to  enter  it  to  get  access  to  the  hard  disk.  You  can  set  the  HDD  password  through  Set  Hard  Disk  Passwords  in  the  BIOS  Setup  Utility.Note: If  you  set  passwords  through  the  BIOS  Setup  Utility  and  put  your  computer  into  standby  mode  by  pressing  Fn  +  F1,  the  following  describes  the  behavior  of  the  computer  when  you  bring  it  out  of  standby  mode:  v  You  are  prompted  to  enter  the  Windows  log-on  password  rather  than  the  User  password  to  resume  operation.  v  If  an  HDD  password  is  assigned  to  any  hard  disk  drive,  the  hard  disk  drive  is  unlocked  automatically  when  you  resume  operation.To set  a  Supervisor  Password:  Only  a  system  administrator  is  able  to  perform  this  procedure.  1.  Turn  on  your  computer.  When  the  Lenovo  logo  and  "Press  <F2>  to  Setup"  come  up,  immediately  press  F2  to  enter  the  BIOS  Setup  Utility  .  2.  Select  Security,  using  the  cursor  directional  keys.  3.  Select  Set  Supervisor  Password,  and  press  Enter.  The  Set  Supervisor  Password  window  opens.  4.  Choose  your  Supervisor  password,  which  can  be  from  one  to  eight  alphanumeric  characters  in  any  combination.  Type  it  in  the  Enter  New  Password  field.  5.  Press  Enter  once  to  move  to  the  Confirm  New  Password  field.  Retype  the  password  you  just  entered  to  verify  it.  6.  Commit  your  password  to  memory,  and  press  Enter.  7.  Press  F10  to  exit.   20   Lenovo(R)  IdeaPadTM  S9e  and  S10e  User  Guide
 
	
		
			参考になったと評価
   44人が参考になったと評価しています。
44人が参考になったと評価しています。
		 
		
 
			この取扱説明書が関連付けられている製品