■The Automatic High Beam can be operated whenThe "POWER" switch is ON mode.■Camera sensor detection information●High beam may not be automatically turned off in the following situations:* When oncoming vehicles suddenly appear from a curve.* When the vehicle is cut in front of by another.●High beam may be turned off if an oncoming vehicle that is using fog lights with -out using the headlights is detected.●House lights, street lights, red traffic sign als, and illuminated billboards or signs may cause the high beam to turn off.1982-3. Operating the lights and windshield wipers■High beam automatic turning on or off conditionsWhen all of the following conditio ns are fulfilled, high beam will be automatically turned on (after approximately 1 second):●Vehicle speed is above approximately 20 mph (32 km/h).●The area ahead of the vehicle is dark.●There are no oncoming or preced ing vehicles with headlights or tail lights turned on.If any of the following conditions are fulfilled, high beam will be auto -matically turned off:●Vehicle speed drops below approximately 20 mph (32 km/h).●The area ahead of the vehicle is not dark.●Oncoming or preceding vehicles have headlights or tail lights turned on.
