ISの取扱説明書・マニュアル [全27ページ 5.98MB]
3
22 / 27 ページ
現在のページURL
1452-1. Driving procedures2When drivingManual transmission∗■ Shifting the shift leverFully depress the clutch pedal before operating the shift lever, and then release it slowly.■ Shifting the shift lever into RShift the shift lever into the R position while lifting up the ring section. ∗: If equipped
参考になったと評価 
3人が参考になったと評価しています。
このマニュアルの目次
-
1 .1242-1. Driving procedure...1242-1. Driving proceduresDriving the vehicleThe following procedures should be observed to ensure safe driving. ■ Starting the engine (→ P. 134 )■ DrivingAutomatic transmissionWith the brake pedal depressed, shift the shift lever to D. ( → P. 139)Releas...
-
2 .1252-1. Driving procedure...1252-1. Driving procedures2When drivingStarting on a steep uphillAutomatic transmissionFirmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake. Manual transmissionWith the parking brake f...
-
3 .1262-1. Driving procedure...1262-1. Driving procedures■Starting off on a hill (vehicles with an automatic transmission)Hill-start assist control will operate. (→ P. 196)■Driving in the rain●Drive carefully when it is raining, because visibility will be reduced, the windows may become...
-
4 .1272-1. Driving procedure...1272-1. Driving procedures2When drivingCAUTION■When starting the vehicleWith automatic transmission vehicles, always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping.■When driving the vehicle●...
-
5 .1282-1. Driving procedure...1282-1. Driving proceduresCAUTION●Moving the shift lever to N while the vehicle is moving will disengage the engine from the transmission. Engine braking is not available when N is selected.●During normal driving, do not turn off the engine. Turning the ...
-
6 .1292-1. Driving procedure...1292-1. Driving procedures2When drivingCAUTION■When driving on slippery road surfaces●Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle, resulting in an accident.●Sudden changes in engine speed...
-
7 .1302-1. Driving procedure...1302-1. Driving proceduresCAUTION■When the vehicle is parked●Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehi-cle when it is in the sun. Doing so may result in the following.* Gas may leak from a cigarette lighter or sp...
-
8 .1312-1. Driving procedure...1312-1. Driving procedures2When drivingCAUTION■When taking a nap in the vehicleAlways turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheatin...
-
9 .1322-1. Driving procedure...1322-1. Driving proceduresNOTICE■When driving the vehicle●Do not depress the accelerator and brake pe dals at the same time during driving, as this may restrain the engine output.With automatic transmission vehicles●Do not use the accelerator pedal or depr...
-
10 .1332-1. Driving procedure...1332-1. Driving procedures2When drivingNOTICE■If you hear a squealing or scraping noise (brake pad wear limit indicators)Have your Lexus dealer check and replace the brake pads as soon as possible. Rotor damage can result if the pads are not replaced when...
-
11 .1342-1. Driving procedure...1342-1. Driving proceduresEngine (ignition) switchPerforming the following operations when carrying the electronic key on your person starts the engine or changes "ENGINE START STOP" switch modes.■ Starting the engineAutomatic transmissionCheck that the pa...
-
12 .1352-1. Driving procedure...1352-1. Driving procedures2When drivingManual transmissionCheck that the parking brake is set.Check that the shift lever is set in N.Firmly depress the clutch pedal.The "ENGINE START STOP" switch indicator turns green.Press the "ENGINE START STOP" switch.T...
-
13 .1362-1. Driving procedure...1362-1. Driving procedures■ Changing "ENGINE START STOP" switch modeModes can be changed by pressing the "ENGINE START STOP" switch with the brake pedal (vehicles with an automatic transmission) or clutch pedal (vehicles with a ma nual transmission) releas...
-
14 .1372-1. Driving procedure...1372-1. Driving procedures2When driving■If the engine does not startThe engine immobilizer system may not have been deactivated. ( → P. 86)■When the steering lock cannot be released■When the "ENGINE START STOP" switch indicator flashes in amberThe system m...
-
15 .1382-1. Driving procedure...1382-1. Driving proceduresCAUTION■When starting the engineAlways start the engine while sitting in the driver's seat. Do not press the accelera-tor while starting the engine under any circumstances. Doing so may cause an accident resu lting in death or se...
-
16 .1392-1. Driving procedure...1392-1. Driving procedures2When drivingAutomatic transmission∗Select a shift position appropriate for the driving conditions.■ Shifting the shift leverWhile the "ENGINE START STOP" switch is in IGNITION ON mode, depress the brake pedal and move the shift l...
-
17 .1402-1. Driving procedure...1402-1. Driving proceduresSelecting shift ranges in the D positionTo drive using temporary shift range se lection, operate the "-" shift paddle switch. The shift range can then be selected by operating the "-" and "+" shift paddle switches. Changing the sh...
-
18 .1412-1. Driving procedure...1412-1. Driving procedures2When driving■ Shift ranges and their functionsA lower shift range will provide greater engine braking force than a higher shift range.Shift range Function6Automatically selecting gears between 1 and 6 according to vehicle speed a...
-
19 .1422-1. Driving procedure...1422-1. Driving proceduresChanging shift ranges in S modeTo enter S mode, shift the shift lever to the S position. The shift range can then be selected by operating the "-" and "+" shift paddle switches or the shift lever. Changing the shift range allows r...
-
20 .1432-1. Driving procedure...1432-1. Driving procedures2When driving■When the "-" shift paddle switch is operated in the D positionWhen the "-" shift paddle switch is operated in the D position, a shift range will be automatically selected. The highest gear of the first shift range wi...
-
21 .1442-1. Driving procedure...1442-1. Driving procedures■If does not come on even after shifting the shift lever to SThis may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Lexus dealer immediately. (In this situation, the vehicle will...
-
22 .1452-1. Driving procedure...1452-1. Driving procedures2When drivingManual transmission∗■ Shifting the shift leverFully depress the clutch pedal before operating the shift lever, and then release it slowly.■ Shifting the shift lever into RShift the shift lever into the R position whil...
-
23 .1462-1. Driving procedure...1462-1. Driving proceduresSnow modeThe snow mode is used for accel -erating and driving on slippery road surfaces, such as on snow. Push the switch once more to return to normal mode. ■Maximum downshifting speedAdhere to the downshifting speeds in the foll...
-
24 .1472-1. Driving procedure...1472-1. Driving procedures2When drivingTurn signal lever■Turn signals can be operated whenThe "ENGINE START STOP" switch is in IGNITION ON mode.■If the indicators flash faster than usualCheck that a light bulb in the turn signal lights has not burned out.R...
-
25 .1482-1. Driving procedure...1482-1. Driving proceduresParking brake■Usage in winter timeSee "Winter driving tips" for parking brake usage in winter time. ( → P. 210)Vehicles with an automatic transmissionSets the parking brake * (Depressing the pedal again releases the parking brake....
-
26 .1492-1. Driving procedure...1492-1. Driving procedures2When drivingNOTICE■Before drivingFully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components over-heating, which may affect braking performance and increase brake wear.
-
27 .1502-1. Driving procedure...1502-1. Driving proceduresHorn■After adjusting the steering wheel (vehicles with manually adjustable type steer -ing wheel)Make sure that the steering wheel is securely locked. The horn may not sound if the steeri ng wheel is not securely locked. (→ P. 69...
