MINIの取扱説明書・マニュアル [全165ページ 2.67MB]
ownersmanual2005.pdf
gizport - 2013-09-04
http://libraryofmotoring.info/.../ownersmanual2005.pdf - 2.67MB
- キャッシュ
36857view
165page / 2.67MB
83OVERVIEW REPAIRS OPERATION CONTROLS DATA INDEXINTEGRATED UNIVERSAL REMOTE CONTROL* The concept The integrated universal remote control takes the place of up to three different con-trol devices for different radio-remote-con-trolled systems such as gate openers and household alarm systems. The integrated universal remote control detects and learns the signal transmitted by the original con-trol device. The signal of an original control device can be programmed onto one of the three memory buttons 1. The system in question can then be operated by means of the pro-grammed memory button 1. Signal trans-mission is indicate d by indicator lamp 2.If you decide to sell your vehicle one day, in the interest of your own security, remem-ber to delete the programs before the vehi-cle leaves your possession, refer to page 84.While programming is in progress and before operating any pro-grammed system by remote control using the integrated universal remote control, make sure that the movement area of the system in question is clear of people, ani-mals and inanimate ob structions, in order to avoid possible injury or damage. Also comply with the safety precautions issued for the original control device. < Checking compatibility If this symbol is depicted on the packaging or in the operating instructions of the original control device, it is safe to assume that the remote-controlled system is compatible with the integrated universal remote control.If you have additional questions, please consult your MINI center or call 1-800-355-3515. You can also visit these websites: www.miniusa.com or www.homelink.com. HomeLink is a registered trademark owned by Johnson Controls, Inc. <Programming 1 Memory buttons 2 Indicator lamp Fixed-code control device 1. Switch on the ignition 2. During initial operation: press and hold both outer buttons 1 approx. 20 seconds until indicator lamp 2 flashes. This clears all three memory buttons 13. Hold the original co ntrol device approx. 2 to 8 in / 5 to 20 cm away from memory buttons 1.The required distance between the control device and memory buttons 1 may vary, depending on the system of the original control device in question. <
参考になったと評価
8人が参考になったと評価しています。
その他の取扱説明書
33004 view
11935 view
42913 view
3538 view
28679 view
もっと見る