MINIの取扱説明書・マニュアル [全165ページ 2.67MB]
ownersmanual2005.pdf
gizport - 2013-09-04
http://libraryofmotoring.info/.../ownersmanual2005.pdf - 2.67MB
- キャッシュ
37506view
165page / 2.67MB
37OVERVIEW REPAIRS OPERATION CONTROLS DATA INDEXCONVERTIBLE TOP Interruption The automatic movement is immediately interrupted when the buttons for convert-ible top operation are released. The proce-dure can be continued in the desired direc-tion by pressing the appropriate buttons. Movement is also interrupted when there is a mechanical blockage. In this case, in order to operate the convertible top again:1. Turn off the ignition and then switch it on again2. Press the button to continue the proce-dure in the desired direction.If the convertible top can only be moved in one direction after several consecutive attempts to operate it, the convertible top system has overheated. Allow the system to cool down for approx. 20 minutes while the ignition is switched on. <Before the closing procedure is fin-ished, do not close the side windows with the power window buttons. Other-wise it is not ensured that the side win-dows will close properly against the rubber seals of the convertible top. <If the opening or closing procedure is inter-rupted by releasing the buttons, the con-vertible top stays in it s current position for several seconds before it slowly moves into a more stable position. The procedure can be continued by pressing the buttons.Do not interrupt and restart the clos-ing procedure several times one after another, or the fully automatic convertible top mechanism could be damaged. <Convenience operation For convenience operation using the remote control refer to page 26, for opera-tion via the door lock refer to page 27.Manual closing in the event of an electrical malfunction Only close the convertible top manu-ally if it is absolutely necessary. Never open it manually. Improper handling of the convertible top can result in damage. <If possible, close the convertible top with the help of a second person. <Before closing 1. Open the tailgate 2. Release the loading aid, refer to page 863. Remove the cover from the side panel on the left-hand side4. Using the screwdriver from the onboard tool kit, refer to page 120, unscrew the corresponding screw, arrow, in the direc-tion of the arrow by rotating it one and a half turns.
参考になったと評価
8人が参考になったと評価しています。
その他の取扱説明書
34005 view
12218 view
43709 view
3664 view
29070 view
もっと見る