1. 取扱説明書・マニュアル >
2. MINI >
3. 自動車 >
4. MINI の使い方、故障・トラブル対処法 >
5. MINI の取扱説明書・マニュアル

MINIの取扱説明書・マニュアル [全176ページ 2.40MB]

76TIRE PRESSURE MONITOR*The conceptTPM checks the inflation pressures of the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires.System requirements In order to assure the reliable reporting of a flat tire, the system must be reset while all tire inflation pressures are correct.Always use wheels with TPM electronics and a metal valve. Otherwise, the system may malfunction.Each time a tire inflation pressure has been corrected or a wheel or tire has been changed, reset the system. <System limitationsTPM cannot warn you in advance of sudden severe tire damage caused by outside influences. <The system does not work correctly if it has not been reset; for example, a flat tire may be indicated even thou gh the tire inflation pressures are correct.The system is inactive and cannot indicate a flat tire if a wheel without TPM electron-ics, such as a compact spare wheel, has been mounted, or if TPM is temporarily malfunctioning due to other systems or de-vices using the same radio frequency.Resetting the systemEach time a tire inflation pressure has been corrected or a wheel or tire has been changed, reset the system. <1. Start the engine, but do not start driving.2. Press the button until the yellow warn-ing lamp in the display elements lights up yellow for several seconds.3. Drive off.After driving a few minutes, the set inflation pressures in the tires are accepted as the target values to be mon-itored. The system reset is completed without notification during your drive, which can be interrupted at any time. When driving resumes, the reset is con-tinued automatically.

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.