MINIの取扱説明書・マニュアル [全186ページ 3.25MB]
ownersmanual2011hardtopconvertible.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2011hardtopconvertible.pdf - 3.25MB
- キャッシュ
7024view
186page / 3.25MB
Replacing components1443.Insert the plug 3 into the power socket in the vehicle interior.4.Correct inflation pressure to 26 psi/180 kPa. With the engine running:>To increase the inflation pressure: switch on the compressor. To check the current infla-tion pressure, switch off the compressor.Do not run the compressor for longer than 10 minutes; otherwise, the device will overheat and possibly be dam-aged.<>To decrease the inflation pressure: press the release button5.If the tire cannot maintain the inflation pressure, drive the vehicle again, refer to Distributing the sealant. Then repeat steps 1to4.If an inflation pressure of 26 psi/180 kPa still cannot be reached, the tire is too heavily dam-aged. Contact the nearest MINI dealer. <Driving onDo not exceed the permitted maximum speed of 50 mph/80 km/h; doing so may result in an accident. <Replace the defective tire as soon as possible and have the new wheel/tire assembly bal-anced.Have the Mobility System refilled.Changing wheelsSpace-saver spare tire*To change a space-saver spare tire, proceed as follows:>Remove the space-saver spare tire, page144>Prepare for tire change, page 145>Jack up vehicle, page 146>Mount space-saver spare tire, page 146>Tighten lug bolts, page 146>Drive with space-saver spare tire, page 145Tire change set for a space-saver spare tire*On vehicles with a space-saver spare tire, the tire change set with onboard tools is stored under the floor mat in the cargo area.1Chock, folding2Extractor hook*3Wheel stud wrench4Vehicle jack5Special wrench for removing the space-saver spare tire6Flat screwdriver/Phillips screwdriver7Towing eyelet8Lifting handleThe onboard vehicle tool kit includes a pouch with a plastic bag in which you can place the damaged wheel.Removing the space-saver spare tireThe screw connection of the space-saver spare tire is under the floor mat in the cargo area, on the base of the storage compartment for the tire change set.1.Unscrew the screw connection with the spe-cial wrench.2.Take out the cover panel.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
33789 view
12137 view
43474 view
3622 view
28967 view
もっと見る