MINIの取扱説明書・マニュアル [全172ページ 3.02MB]
ownersmanual2011clubman.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2011clubman.pdf - 3.02MB
- キャッシュ
33068view
172page / 3.02MB
Replacing components1321Compressor2Wheel stud wrench*3Vehicle jack *4Torx insert bit for screwdriver5Flat screwdriver/Phillips screwdriver, towing eyelet6Extractor hook7Sealant bottleSealant and compressor1Sealant bottle and adhesive label with speed limit2Filling hoseNote the use-by date on the sealant bot-tle.<3Holder for the sealant bottle4Compressor5Plug and cable for the socket in the vehicle interior, page816Connection hose to connect the compressor and sealant bottle or the compressor and wheel7On/off switch8Pressure gauge for indicating the tire infla-tion pressure9Release button for reducing the tire inflation pressureConnector, cable and connection hose are stored in the compressor housing.Using the Mobility SystemTo repair a tire puncture with the Mobility Sys-tem, proceed as follows:>Filling the tire with sealant>Distribute the sealant>Correct the tire inflation pressureFilling the tire with sealantProceed in the specified order; otherwise, sealant may emerge under high pres-sure.<1.Shake the sealant bottle.2.Pull the connecting hose 9 completely out of the compressor housing and screw it onto the connector of the sealant bottle. Make sure that the hose is not kinked.3.Insert the sealant bottle on the compressor housing in an upright position.4.Unscrew the dust cap from the valve of the defective wheel and screw the filling hose 2 of the sealant bottle onto the valve.
参考になったと評価
10人が参考になったと評価しています。
その他の取扱説明書
11935 view
43011 view
3545 view
28682 view
36920 view
もっと見る