MINIの取扱説明書・マニュアル [全172ページ 3.02MB]
ownersmanual2011clubman.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2011clubman.pdf - 3.02MB
- キャッシュ
32744view
172page / 3.02MB
133AT A GLANCE REFERENCE MOBILITY CONTROLS DRIVING TIPS COMMUNICATIONS5.Ensure that the compressor is switched off.6.Insert the plug 3 into the lighter socket/power socket in the vehicle interior, page81.7.With the engine running: Switch on the compressor and let is run for approx. 3 to 8 minutes to fill the tire with sealant and achieve a tire inflation pressure of approx. 26 psi/180 kPa.When filling the tire with sealant, the inflation pressure can briefly rise to approx. 73 psi/500 kPa. Do not switch off the compressor during this phase. <Do not run the compressor for longer than 10 minutes; otherwise, the device will overheat and possibly be dam-aged.<8.Switch off the compressor.If an air pressure of 26 psi/180 kPa is not reached:1.Unscrew the filling hose 2 from the wheel and drive the vehicle forward and backward approx. 33 ft/10 m to distribute the liquid sealant in the tire evenly.2.Inflate the tire again with the compressor.If an inflation pressure of 26 psi/180 kPa still cannot be reached, the tire is too heavily damaged. Please contact the nearest MINI dealer.<Stowing Mobility System1.Unscrew filler hose 2 of the sealant bottle from the wheel.2.Unscrew connecting hose of the compressor9 from the sealant bottle.3.Connect the filler hose 2 of the sealant bot-tle to the unoccupied connection on the sealant bottle.This prevents the rest of the sealant from escaping from the bottle.4.Wrap the empty sealant bottle in suitable material to avoid dirtying the cargo area.5.Stow Mobility System back in the vehicle.Distributing the sealantImmediately drive approx. 3 mls/5 km to evenly distribute the sealant.Do not exceed speeds of 50 mph/ 80 km/h.If possible, do not drop below 10 mph/ 20 km/h.<Correct the tire inflation pressure1.After driving approx. 3 mls/5 km or ten min-utes, stop at a suitable location.2.Screw the connection hose 2 of the com-pressor directly onto the tire valve.3.Insert the plug 3 into the power socket in the vehicle interior.4.Correct inflation pressure to 26 psi/180 kPa. With the engine running:>To increase the inflation pressure: switch on the compressor. To check the current infla-tion pressure, switch off the compressor.Do not run the compressor for longer than 10 minutes; otherwise, the device will overheat and possibly be dam-aged.<>To decrease the inflation pressure: press the release button5.If the tire cannot maintain the inflation pressure, drive the vehicle again, refer to Distributing the sealant. Then repeat steps 1to4.If an inflation pressure of 26 psi/180 kPa still cannot be reached, the tire is too heavily dam-aged. Contact the nearest MINI dealer. <Driving onDo not exceed the permitted maximum speed of 50 mph/80 km/h; doing so may result in an accident. <Replace the defective tire as soon as possible and have the new wheel/tire assembly bal-anced.Have the Mobility System refilled.
参考になったと評価
10人が参考になったと評価しています。
その他の取扱説明書
11841 view
42654 view
3489 view
28492 view
36670 view
もっと見る