X3の取扱説明書・マニュアル [全146ページ 4.87MB]
123811.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123811.pdf - 4.87MB
- キャッシュ
22140view
146page / 4.87MB
Driving44Cruise control*The vehicle maintains and stores the speed that you set at speeds greater than approx. 20 mph/30 km/h.You can use cruise control whenever the sys-tem is active while the engine is running.Do not use the cruise control under unfa-vorable conditions th at do not permit a constant speed, e.g. when driving on winding roads or in heavy traffi c or when negotiating poor road conditions such as snow, rain, ice, or a loose road surface. Otherwise, you could lose control of the vehicle and cause an accident. <Indicator lampThe indicator lamp lights up green: sys-tem ready for operation using the but-tons on the steering wheel.Activating systemWith ignition key in position 2 or higher: Press button on steering wheel; the indicator lamp in the instrument cluster comes on. The cruise control mode is enabled.Deactivating systemPress the button repeatedly until the indicator lamp in the instrument cluster goes out.The cruise control is al so deactivated when the ignition key is turned to position 0. The speed stored in the memory is deleted in the process.Maintaining speed, storing, and acceleratingBriefly press + button:The system maintains and stores the current vehicle speed. Each addi tional touch of the but-ton increases the speed by approx. 1 mph/1km/h.Press and hold + button:The vehicle accelerates without pressure on the accelerator pedal. When you release the button, the system maintains and stores the current speed.If the braking action of the engine is insufficient on a downhill stretch, th en the set vehicle can exceed the set speed. Speed can drop on uphill grades if the engine output is insufficient.DeceleratingBriefly press - button:Each press of the button decreases the vehi-cle's speed by roughly 1 mph/1 km/h, provided that you have already ac tivated the cruise con-trol.Press and hold - button:With the cruise control active, the system auto-matically reduces the fu el supply to slow the vehicle. When you rele ase the button, the sys-tem maintains and stores the current speed.Interrupting cruise controlWhen the system is acti vated, press the button. The indicator lamp stays on. You can use the cruise control again whenever required by requesting the speed that was stored last.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
54162 view
26389 view
21096 view
21244 view
23290 view
もっと見る