Z4の取扱説明書・マニュアル [全120ページ 3.44MB]
123816.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123816.pdf - 3.44MB
- キャッシュ
28338view
120page / 3.44MB
ReferenceAt a glanceControlsDriving tipsMobility 45Cruise control* 1To maintain and store speed/to accelerate2To decelerate3To recall the stored setting4To deactivate the systemDo not use cruise control on twisting roads, when high traffic density pre-vents driving at a constant speed, when the road surface is slick, e.g. from snow, rain or ice, nor when the road surface is loose, e.g. from rocks or sand. <To maintain and store speed/to accelerateYou can maintain and store any desired speed above approx. 20 mph / 30 km/h.Press the lever briefly in direction 1:The system maintains and stores the cur-rent vehicle speed. Every time you tap the lever, the speed increases by approx. 0.6 mph / 1 km/h.Hold the lever in position 1:The vehicle accelerates without pressure on the accelerator pedal. As soon as you release the lever, the system stores and maintains the current speed.If, on a downhill grade, the engine braking effect is not sufficient, the controlled speed can be exceeded. Speed can drop on uphill grades if the engine out-put is insufficient. <To deceleratePress the lever briefly in direction 2:When the cruise control is active, vehicle speed is reduced by approx. 0.6 mph / 1 km/h every time you tap the button.Hold the lever in position 2:With the cruise control active, the system automatically reduces the throttle opening to slow the vehicle. As soon as you release the lever, the system stores and maintains the current speed.To recall the stored settingPress the lever briefly in direction 3:The vehicle accelerates to and maintains the last speed stored.To deactivate the system Press the lever briefly in direction 4:The cruise control is deactivated immedi-ately.In addition, the system is automatically deactivated in response to the following conditions:>When you apply the brakes>When you depress the clutch or move the automatic selector lever from D to N>If you exceed or fall below the preset speed for an extended period, for example by depressing the accelerator.You can recall the speed last stored.Cruise control is also deactivated when the ignition key is turned to position 0.The stored speed is cleared in this case.
参考になったと評価
18人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る