Z4の取扱説明書・マニュアル [全120ページ 3.44MB]
123816.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123816.pdf - 3.44MB
- キャッシュ
28338view
120page / 3.44MB
ReferenceAt a glanceControlsDriving tipsMobility 49Between the blue and red zonesNormal operating range. The needle may rise as far as the edge of the red sector dur-ing normal operation.RedWhen you switch on the ignition, warning lamp 1 comes on briefly to indicate an operational check.Comes on while driving: The engine has overheated. Stop and switch the engine off immediately and allow it to cool down.For checking the coolant level, refer to page 84.Service interval display Remaining distance to next service The displays shown in the illustration appear for a few seconds when the ignition key is in position 1 or after the engine is started.The next service due appears with the message OIL SERVICE or INSPECTION, together with the distance remaining in miles - in kilometers in Canada - before the next scheduled service.The computer bases its calculations of the remaining distance on the preceding driv-ing style.A flashing message and a minus sign in front of the number mean that the service interval has already been exceeded by the distance shown on the display. Please con-tact your BMW center for an appointment.Outside temperatureIf the vehicle is not equipped with a com-puter, the display in the instrument cluster always shows the outside temperature.Clock If you wish to have a permanent time dis-play, you can have it appear in the car radio display, refer to the Owner's Manual for Radio.You can set the clock and the time display in the car radio as follows.To set Ignition key in position 1 or higher:Hours1.Keep button 2 pressed for several sec-onds until the hours are displayed and the colon flashes2.Press button 1 repeatedly until the required hour is setMinutes3.Press button 2 to switch to the minutes display
参考になったと評価
18人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る