Z4の取扱説明書・マニュアル [全120ページ 3.44MB]
123816.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123816.pdf - 3.44MB
- キャッシュ
28338view
120page / 3.44MB
Technology for safety and driving convenience54The display has two levels:>Normal braking:Brake lamp 1 lights up on both sides of the vehicle together with the center brake lamp>Forceful braking and braking with ABS:Brake lamps 1 and 2 light up on both vehicle sides together with the center brake lamp.Antilock Brake System ABSThe conceptABS keeps the wheels from locking during braking, thereby enhancing active driving safety.MalfunctionsIf the yellow indicator lamp for the Antilock Brake System ABS comes on together with the brake warning lamp and the indicator lamp for the Dynamic Stability Control DSC:The entire ABS and DSC control system has failed. Continue driving cautiously and defensively. Avoid hard brake applications. Please have the system checked by your BMW center as soon as possible.Indicator lamp for the Antilock Brake System ABS with the brake warning lamp and the indicator lamp for the Dynamic Stability Con-trol DSC for Canadian models.Braking with ABSIf you are in a situation which requires full braking, you will exploit the full benefits of the ABS system if you apply maximum brake pressure: panic stop.Pulsation at the brake pedal combines with sounds from the hydraulic circuits to indi-cate to the driver that ABS is in its active mode.Flat Tire Monitor The conceptAs you drive, the Flat Tire Monitor keeps track of pressure levels in all four tires. The system alerts you whenever the inflation pressure of a tire falls significantly below the pressure of another tire.The system actually detects pressure loss by monitoring differences in the relative speeds of the four wheels. It interprets vari-ations outside specified limits as severe pressure loss, and then responds by gen-erating a warning.System requirementsIn order for the Flat Tire Monitor to learn the correct tire inflation pressure, please do the following:1.Check the tire inflation pressures in all tires2.Compare to the inflation pressure table, refer to page 76, and correct if neces-sary3.Initialize the system.If the system is not initialized, undetected losses in pressure or false warnings that indicate a non-exis-tent flat tire are possible. <System limitationsThe Flat Tire Monitor cannot provide you with advance warning of sudden and severe tire damage caused by external factors and does not detect the balanced and very gradual pressure loss that takes
参考になったと評価
18人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る