1. 取扱説明書・マニュアル >
2. ヒューレット・パッカード >
3. パソコン >
4. パソコン周辺機器 >
5. 液晶モニタ・液晶ディスプレイ >
6. HP LP2275w の使い方、故障・トラブル対処法 >
7. HP LP2275w の取扱説明書・マニュアル

HP LP2275wの取扱説明書・マニュアル [全55ページ 3.47MB]

To set the timer:1.Press the Menu button on the monitor front panel to display the OSD Menu.2.Scroll down and highlight Management.3.Press the Menu button to select Management.4.Scroll down and highlight and select Sleep Timer > Set Current Time .NOTE:You must set the current local time before you reset the time for Sleep Time or OnTime. Note that the time is displayed in a 24-hour clock format. For example, 1:15 p.m. is displayedas 13 hours 15 minutes.5.Press the Menu button once to enter the adjustment mode for hours.6.Press the - (Minus) or + (Plus) button to adjust the hour.7.Press the Menu button again to enter the time for minutes.8.Press the - (Minus) or + (Plus) button to adjust the minutes.9.Press the Menu button to lock in the time chosen.10.After setting the current time, the highlight automatically skips to Set Sleep Time hours . Repeatsteps 6 through 9 to set Sleep Time.11.If you do not want to set Sleep Time, press the Menu button twice, then select Save andReturn to exit the menu.12.After setting Sleep Time, the highlight automatically skips to Set On Time hours. Repeat steps 6through 9 to set On Time.13.Set the Timer mode to On to activate the Sleep Timer settings.14.When you are finished, select Save and Return to exit the menu.The fifth selection, Sleep Now, turns the monitor backlights off immediately and stays in sleep modeuntil the next On Time activates or a monitor button is pressed.HP Display LiteSaverHP Display LiteSaver is a software application, av ailable on the CD, that increases monitor life andsaves energy. It allows you to place the monitor into its low power sleep mode at predefined times byshutting down or reducing power to most internal circuits. This helps protect the LCD panel againstimage retention. Image retention can occur when the monitor is left on while displaying the same imagefor an extended period of time, leaving a shadow of the image on the screen.Installing the HP Display LiteSaver Software1.Insert the CD in the computer CD-ROM Drive. The CD menu is displayed.2.Select Install HP Display LiteSaver Software .3.After installing the software, click the HP Display LiteSaver icon in the Windows system tray orright-click the icon and select Configure from the pop-up menu.4.Select the following options to configure the HP Display LiteSaver features:32 Chapter 4 Operating the Monitor

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.