Integrate Mouse Clicksanother special feature of the ROCC aT driver is that it allows you to integrate mouse clicks into a macro along with keyboard commands. You can program a mouse event to be executed after, before or in-between a key sequence. To do that, select the keyboard command in the ‘Macro Basic Manager’ before or after which you want to insert a new event. By right clicking, you can open a window that contains various options:Start Record before: Starts recording the macro before the selected event.Start Record after: Starts recording the macro after the selected event.Insert Delay: Manually increase or decrease the delay between two commands.Insert Mouse Event: Specify which mouse event should be executed. The following options are available: Left Button: Left mouse button Right Button: mouse button Wheel: mousewheel button Side Button : The upper side button Side Button : The lower side buttonThere are always three events to choose from: Down: the button depressed Up: the button Click: the commands ‘press’ and 'release’ in turn.Note: It isn’t possible to program the scroll function to the mousewheel. Here too, only three options are available: ‘press’, ‘release’ as well as ‘press and release’. Edit Delay: You can manually increase or decrease the delay here. All you need to do is enter the desired time value; there’s no need to enter ‘ms’ (milliseconds).Note: Some games are unable to detect short delays.Delete: Delete the selected step from the macro’s key sequence.MACRO MAnAGER
