1. 取扱説明書・マニュアル >
2. DELL >
3. パソコン >
4. パソコン本体 >
5. ノートパソコン >
6. Vostro 1500 の使い方、故障・トラブル対処法 >
7. Vostro 1500 の取扱説明書・マニュアル

Vostro 1500の取扱説明書・マニュアル [全66ページ 1.77MB]

 Replacing the Processor Module CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.NOTICE: Do not touch the processor die. Press and hold the processor down on the substrate on which the die is mounted while turning the cam screwto prevent intermittent contact between the cam screw and processor.NOTICE: Ensure that the cam lock is in the fully open position before seating the processor module. Seating the processor module properly in the ZIFsocket does not require force. A processor module that is not properly seated can result in an intermittent connection or permanent damage to themicroprocessor and ZIF socket.NOTE: If a new processor is installed, you will receive a new thermal-cooling assembly, which will include an affixed thermal pad, or you will receive anew thermal pad along with a tech sheet to illustrate proper installation.1. Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket, then insert the processor module.NOTE: The pin-1 corner of the processor module has a triangle that aligns with the triangle on the pin-1 corner of the ZIF socket.When the processor module is properly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than theothers, the module is not seated properly.1 ZIF-socket cam screw 2 ZIF socket3 pin-1 corner  NOTICE: To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.2. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.3. Replace the processor thermal-cooling assembly (see Replacing the Processor Thermal-Cooling Assembly).4. Replace the palm rest (see Replacing the Palm Rest).5. Replace the internal card with Bluetooth wireless technology, if applicable (see Replacing the Bluetooth Card).6. Replace the display assembly (see Replacing the Display Assembly).7. Replace the keyboard (see Replacing the Keyboard).8. Replace the hinge cover (see Replacing the Hinge Cover).9. Replace the hard drive (see Replacing the Hard Drive).10. Replace the optical drive (see Replacing the Optical Drive).Back to Contents Page 

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.