S P E C F I L EPT-LB1VLCD ProjectorAs of May 2011SFL11M00110/10Notes on projector placement and operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe thefollowing precautions.1. Never place objects on top of the projector. 2. Make sure there is an unobstructed space of 500 mm (19-11/16") or more around the projector'sexhaust openings. Also, make sure there is an efficient space for replacing lamp units or detachingor attaching the air filter.3. Make sure that nothing blocks the projector's air intake and exhaust openings. Also, install the pro-jector so that cool or hot air from other air conditioning equipment does not flow directly towardthe projector's air intake or exhaust openings. 4. Do not install the projector in an enclosed space. If it is necessary to install it in an enclosedspace, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at theintake opening. This may cause the projector's protective circuit to interrupt projector operation. Direction of air intake and exhaust200 mm (7-7/8") or more500 mm (19-11/16") or more500 mm (19-11/16") or moreOperating the projector continuously1. If the projector is to be operated continuously 10 hours or more, lamp replacement cycle durationbecomes shorter. 2. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for shortperiods (one hour or less).IntakeExhaustWeights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.PJLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions. This product may be subject to export control regulations. All other trademarks are the property of their respective trademark owners.
