1. 取扱説明書・マニュアル >
2. カメラ >
3. カメラ関連製品 >
4. フィルムスキャナ >
5. フィルムスキャナ 全般 の使い方、故障・トラブル対処法 >
6. フィルムスキャナ 全般 の取扱説明書・マニュアル

LS-30の取扱説明書・マニュアル [全49ページ 3.39MB]

- 5 -Safety PrecautionsSafety PrecautionsObserve the following safety precautions when installing andoperating the LS-30:*Do not allow your fingers, hair, or clothing into thefilm insertion slotDo not insert your fingers, hair, or clothing into the filminsertion slot on the front of the scanner when the power ison and a film adapter is in place. Doing so could result ininjury.*Use an appropriate power supplyUse an AC power supply of 50/60Hz and a voltage of from100V-240V. Be sure to use a power cord rated for theappropriate voltage.At voltages of more than AC 125V:use a power cord that complies with the safety standards ofthe country in which it is used, which has a plug rated for AC250V, 15A (NEMA 6P-15) and insulation of SVT type orbetter, and which is more than AWG18 in thickness.At voltages of AC 125V or less:use a power cord that complies with the safety standards ofthe country in which it is used, which has a plug rated for AC125V, 10A and insulation of SVT type or better, and which ismore than AWG18 in thickness.*Connect the scanner to groundThe outlet into which the power cable is plugged must begrounded. Failure to ground the power supply could resultin electric shock.* The scanner and all devices to which it is connected must beconnected to a common ground. If a common ground is notused, a ground loop could occur, causing electric shock ornoise static.* Do not ground the outlet to a gas or water pipe.* The shape of the cable mayvary depending on the countryof sale.

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.