Aspire 5741の取扱説明書・マニュアル [全2345ページ 37.05MB]
27EnglishTo remove a battery pack:1 Slide the battery release latch to release the battery.2 Pull the battery from the battery bay.Charging the batteryTo charge the battery, first make sure that it is correctly installed in the battery bay. Plug the AC adapter in to the computer, and connect to a mains power outlet. You can continue to operate your computer on AC power while your battery is chargi ng. However, charging the battery with the computer turned off resul ts in a significantly faster charge time.Note: You are advised to charge the battery before retiring for the day. Charging the battery overnight before traveling enables you to start the next day with a fully charged battery.Checking the battery levelThe Windows power meter indicates th e current battery level. Rest the cursor over the battery/ power icon on the taskba r to see the battery's present charge level.Optimising battery lifeOptimizing battery life helps yo u get the most out of battery operation, prolonging the charge/recharge cycle and improving recharging efficiency. You are advi sed to follow the suggestions set out below:* Purchase an extra battery pack.* Use AC power whenever possible , reserving battery for on-the-go use.* Eject a PC Card if it is not being used, as it will continue to draw power (for selected model).* Store the battery pack in a co ol, dry place. The recommended temperature is 10C (50F) to 30 C (86F). Higher temperatures cause the battery to self-discharge faster.* Excessive recharging decreases the battery life.* Look after your AC adapter and battery.