1542-2. Instrument clusternGear position display (vehicles with an automatic transmission only) Indicates the current gear, and the range of gearsthat is available when the shift lever is in the D or Sposition. the gear range is shown by the number ofdots (•) and the current gear is shown as a number.The transmission automatically selects the gearswithin the driver selected gear range.In the illustration to the left, a range of 6 available gears(1 through 6) has been selected by the driver. (The shiftlever is in the D or S position with 6 ranges enabled) It ispossible for the transmission to automatically selectbetween all 6 of the gears. In this case, the transmissionhas selected third gear.nSystem check displayAfter switching the "ENGINE START ST OP" switch to IGNITION ON mode,"CHECK" is displayed while system operation is checked. When the system checkis complete, "COMPLETED" is displayed before returning to the normal screen. nOutside temperature displayIn the following situations, the correct outside temperature may not be displayed, orthe display may take longer than normal to change.lWhen stopped, or driving at low speeds (less than 12 mph [20 km/h])lWhen the outside temperature has changed suddenly (at the entrance/exit of agarage, tunnel, etc.)
