MINIの取扱説明書・マニュアル [全148ページ 2.36MB]
ownersmanual2007hardtop.pdf
gizport - 2013-09-04
http://libraryofmotoring.info/.../ownersmanual2007hardtop.pdf - 2.36MB
- キャッシュ
6139view
148page / 2.36MB
Replacing components102Replacing componentsOnboard tool kitThe onboard tool kit is stored in a compartment underneath the cargo area floor panel.Wiper bladesChanging the front wiper blades1.Fold up the wiper arm.2.Position the wiper blade horizontally.3.Press the securing spring, arrow.4.Unhook the wiper blade toward the wind-shield.5.Pull the wiper blade past the wiper arm toward the top.6.Insert the new wiper blade.7.Press into position until you hear it engage.To avoid damage, make sure that the wiper arms are against the windshield before you open the bonnet. <Changing rear wiper blade1.Fold up the wiper arm.2.Rotate the wiper blade toward the back as far as it will go, arrow.3.Press the wiper blade against the limit and thus out of the mounting.4.Press the new wiper blade into the fixture until it engages audibly.Lamps and bulbsLamps and bulbs make an essential contribution to vehicle safety. They should, therefore, be handled carefully. The manufacturer of your MINI recommends having your MINI Dealer per-form any work that you do not feel competent to perform yourself or that is not described here.Never touch the glass of new bulbs with your bare fingers, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or something similar, or hold the bulb by its base. <You can obtain a selection of replacement bulbs at your MINI Dealer.When working on electrical systems, always begin by switching off the con-sumer in question, otherwise short circuits could result. To avoid possible injury or equipment damage when replacing bulbs, observe any instructions provided by the bulb manufac-turer.<
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
33136 view
11942 view
43062 view
3554 view
28700 view
もっと見る