X3の取扱説明書・マニュアル [全132ページ 3.62MB]
123804.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123804.pdf - 3.62MB
- キャッシュ
25955view
132page / 3.62MB
Replacing components1041.Unscrew bolt, refer to arrow 12.Fold up lifting handle, refer to arrow 23.Turn the handle to the left as far as pos-sible, refer to arrow 3Turning the handle releases the compact wheel. Weight approx. 18 lbs/8 kg. It must be held with the handle.<4.Slowly lower the handle as far as possi-ble, refer to arrow 45.Take out the compact wheel towards the back6.Refit the compact wheel holder in reverse order.The defective wheel cannot be fitted in the compact wheel holder in place of the compact wheel. < Preparing wheel changeObserve the safety precautions on page 103.<1.Secure the vehicle to prevent it from rolling:Place the wheel chock against the rear surface of the front tire on the side opposite the side being raised. If the vehicle is parked on a downward slope, place the wheel chock securely in front of the tire. If the wheel must be changed on a surface with a more severe slope, take additional precautions to secure the vehicle from rolling2.Loosen the lug bolts by a g turn.Jacking up vehicle1.Position the vehicle jack at the jacking point closest to the wheel so that the entire surface of the jack base perpen-dicularly contacts the ground under the jacking point2.Guide the jack head into the rectangular recess of the jacking point when crank-ing up, refer to section of illustration3.Jack the vehicle up until the wheel you are changing is raised from the ground.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
54212 view
26426 view
21143 view
21290 view
23333 view
もっと見る