X3の取扱説明書・マニュアル [全132ページ 3.62MB]
123805.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123805.pdf - 3.62MB
- キャッシュ
26389view
132page / 3.62MB
ReferenceAt a glanceControlsDriving tipsMobility 51Indicator lamp The indicator lamp in the instrument cluster goes out soon after you start the engine.If the indicator lamp flashes:DSC is active and is regulating the drive and braking forces. The indicator lamp stays lit:DSC has been switched off using the but-ton and the stabilizing interventions are no longer available.Switching off DSC Press the button; the indicator lamp comes on and stays on. Stabilizing interventions of the chassis con-trol system DSC are no longer available. However, the braking interventions that simulate the function of the differential lock continue to be active.In the following exceptional circumstances, it may be effective to switch off the DSC for a short period: >When rocking the vehicle and starting off in deep snow or on loose road sur-faces >On sandy road surfaces >On poor surfaces with deep ruts >If the wheels churn on muddy surfaces>When driving with snow chains. As a result of the braking interven-tions, the brakes may be subjected to additional loads when the system is switched off. In order to limit the brake tem-perature, brief automatic masking of the brake activation is possible. To maintain vehicle stability, always drive with the system switched on when possi-ble.< Switching DSC on Press the DSC button again; the indicator lamp in the instrument cluster goes out. DSC is now activated.xDrivexDrive is the all-wheel drive system of your BMW X3. The combined effects of xDrive and DSC further optimize the traction and dynamic driving characteristics. The all-wheel drive system xDrive variably distrib-utes the drive torque to the front and rear axle depending on the driving situation and prevailing road conditions.Hill Descent Control HDCThe concept HDC is a system for hill descent assistance that reduces the speed on steep downward inclines and makes it even easier to control the driving characteristics of your BMW under these conditions.The vehicle moves at slightly more than walking speed without active intervention from the driver. HDC is available for activation at vehicle speeds below approx. 20 mph/35 km/h. When driving down steep hills with a speed below approx. 20 mph/35 km/h, the vehi-cle reduces speed automatically down to slightly more than walking speed, approx. 5 mph/8 km/h, and then maintains this speed at a constant. You can use the accelerator or brakes to vary this automatically controlled speed within a range extending from approx. 3 mph/5 km/h to 15 mph/25 km/h.You can specify a target speed within the same range by using the +/- buttons of the cruise control in the steering wheel.HDC is automatically deactivated once vehicle speed again exceeds approx. 35 mph/60 km/h.
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
54162 view
21096 view
21244 view
23290 view
22420 view
もっと見る