1. 取扱説明書・マニュアル >
2. BMW >
3. 自動車 >
4. X3 の使い方、故障・トラブル対処法 >
5. X3 の取扱説明書・マニュアル

X3の取扱説明書・マニュアル [全132ページ 3.62MB]

ReferenceAt a glanceControlsDriving tipsMobility 61Air supply/blowerYou can select blower speeds 1 to 4. The heating and ventilation become more and more effec-tive as the air supply settings are increased. In position 0, the blower and heater are switched off. The air supply is blocked in position 0. TemperatureTo increase the temperature of the interior, turn to the right.Air distribution You can direct air to flow onto the windows , toward the upper body and into the footwell . All intermediate settings are possible. In the setting, there is a low flow of air onto the windows to keep them free of condensa-tion.Rear window defroster When the rear window defroster is activated, the indicator lamp comes on. The rear window defroster switches off automatically.You can have your vehicle pro-grammed in such a way that the rear window defroster switches on automati-cally. It is then switched on at outside tem-peratures of less than approx. +4 6/397 within 5 minutes of the engine start. < Air conditioningThe air is cooled and dehumidi-fied and - depending on the temperature setting - warmed again. Depending on the weather, the windshield may fog over briefly when the engine is started. You can reduce conden-sation forming on the windows by switch-ing on the air conditioning.During air conditioning condensation forms, which then exits under the vehicle. Traces of condensed water of this kind are thus normal. <Outside air/recirculated-air modeYou can respond to unpleasant odors outside the vehicle by temporarily switching off the outside air supply. The system then recir-culates the air currently within the vehicle.If condensation starts to form on the inside window surfaces during opera-tion in the recirculated-air mode, you should switch it off while also increasing air supply as required. The recirculated-air mode should not be used over a sustained longer period of time, as the air quality inside the vehicle deteriorates. <Ventilation The air vents for the upper body area can be adjusted:1Serrated dials 1 for steplessly opening and closing the air vents2Selector levers for airflow direction3Use the serrated dial 3 to adjust the amount of cool air that is added to the airflow emerging from the vent outlets for the upper bodyVentilation for coolingAdjust the vents to direct the flow of cool air in your direction, for instance, if the inte-rior has become too warm, etc.Draft-free ventilationSet the vent outlets so that the air flows past you and is not directed straight at you.

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.