X3の取扱説明書・マニュアル [全133ページ 8.37MB]
123808.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123808.pdf - 8.37MB
- キャッシュ
23008view
133page / 8.37MB
ReferenceAt a glanceControlsDriving tipsMobility 99Replacing componentsOnboard tool kitThe onboard tool kit is located in a compart-ment on the left in the cargo area.Wiper bladesReplacing front wiper blades1.Move the wiper into the fold-out position, refer to page40.2.Lift the wiper arm and press the securing spring, refer to arrow.3.Pull the wiper blade off toward the wiper arm.4.Insert the new blade and snap it into place.To prevent damage to the wipers, always fold them back down onto the windshield before you turn the ignition key to position 1 or 2 or open the hood. <Replacing rear wiper blade1.Lift the wiper arm.2.Pull off the wiper blade, refer to arrow.3.Insert a new wiper blade.Lamps and bulbsLamps and bulbs make a significant contribu-tion to road safety. Therefore, comply fully with the following instructions during bulb replace-ment. If you are not familiar with the specified procedures or they are not described here, BMW recommends having this work carried out at your BMW Sports Activity Vehicle Center.Never touch the glass of new bulbs with your bare fingers, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean cloth, paper towel, or the like or grasp bulb by its base.<A replacement bulb set is available from your BMW Sports Activity Vehicle Center.In all work on the electrical system, switch off the relevant component to prevent short circuits. To avoid possible injury or equip-ment damage when replacing bulbs, follow any instructions provided by the bulb manufac-turer.<When maintaining the headlamps, please follow the instructions in the separate Caring for your vehicle brochure.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
53119 view
26085 view
20837 view
20989 view
22105 view
もっと見る