5436-1. Specifications6Vehicle specifications■ Temperature A, B, CThe temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire fail-ure.The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Mo tor Vehicle Safety Standard No. 109.Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excess ive loading, either separately or in combination, can cause heat buildup and possible tire failure.Glossary of tire terminologyTire related term MeaningAccessory weightThe combined weight (in excess of those standard items which may be replaced) of automatic transmis-sion, power steering, power brakes, power windows, power seats, radio and heater, to the extent that these items are available as factory-installed equipment (whether installed or not)Cold tire inflation pres-sureTire pressure when the vehicle has been parked for three hours or more, or has not been driven more than 1 mile or 1.5 km under that conditionCurb weightThe weight of a motor vehicle with standard equip-ment, including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine
