MINIの取扱説明書・マニュアル [全140ページ 1.68MB]
ownersmanual2002.pdf
gizport - 2013-09-04
http://libraryofmotoring.info/.../ownersmanual2002.pdf - 1.68MB
- キャッシュ
11748view
140page / 1.68MB
63OVERVIEW REPAIRS OPERATION CONTROLS DATA INDEXFLAT TIRE MONITOR PARK DISTANCE CONTROL (PDC)*Do not initialize the system when snow chains are fitted. When driving with snow chains, false alarms can occur or pressure losses might not be detected. <In the following situations false alarms can also occur under certain circumstances or the detection of inflation pressure loss can be delayed:> When driving on roads covered with snow or on other slippery road surfaces > A sporty driving style (slip at the driven wheels, high lateral accelerations). <The concept The PDC assists you when you back into a parking space. A signal warns you of the distance to an obstacle. To do this, four ultrasonic sensors in the rear bumper measure the distance to the nearest object. The range for the sensors located at both rear corners ends approx. 2 ft (60 cm) behind the bumpers. The range for the two middle sensors is slightly less than 5 ft (1.5 meters).The system starts to operate automatically about one second after you select reverse with the ignition key in position 2. PDC is deactivated when you shift back out of reverse. Acoustical signals The distance to the nearest object is indi-cated by a tone sounding at various inter-vals. As the distance between vehicle and object decreases, the intervals between the tones become shorter. A continuous tone indicates the presence of an object less than 9 in (20 cm) away.The warning signal is canceled after approx. three seconds if the distance to the obstacle remains constant during this time (if you are moving parallel to a wall, for instance).System malfunctions will be indicated by a continuous high-pitched tone when the system is activated the first time. Please have your MINI center resolve the problem.Even with PDC, final responsibility for estimating the distance between the vehicle and any obstructions always remains with the driver. Even when sensors are involved, there is a blind spot in which objects cannot be detected. Moreover, the detection of obstructions can approach the physical limits of ultrasonic measurement, as occurs e. g. in the case of thin and wedge-shaped objects. Certain sources of sound, such as a loud radio, could drown out the PDC signal tone. <Keep the sensors clean and free of ice or snow in order to ensure that they will continue to operate effectively.Do not apply high pressure spray to the sensors for a prolonged period of time. Always maintain a distance of more than 4 in (10 cm). <
参考になったと評価
8人が参考になったと評価しています。
その他の取扱説明書
32620 view
42504 view
3450 view
28384 view
36515 view
もっと見る