1. 取扱説明書・マニュアル >
2. MINI >
3. 自動車 >
4. MINI の使い方、故障・トラブル対処法 >
5. MINI の取扱説明書・マニュアル

MINIの取扱説明書・マニュアル [全176ページ 2.84MB]

131AT A GLANCE Reference Mobility Controls Driving tips CommunicationsReplacing componentsWiper bladesChanging the front wiper blades1.Fold out the wiper arm and hold it.2.Press together the locking spring, arrows 1, and fold out the wiper blade, arrow 2.3.Pull the wiper blade forward and out of the catch mechanism.4.Press the new wiper blade into the fixture until it engages audibly.To avoid damage, make sure that the wiper arms are against the windshield before you open the hood. <Changing the rear wiper blade1.Fold out the wiper arm and hold it.2.Rotate the wiper blade toward the back as far as it will go, arrow.3.Press the wiper blade against the limit and thus out of the mounting.4.Press the new wiper blade into the fixture until it engages audibly.Lamps and bulbsLamps and bulbs make an essential contribution to vehicle safety. They should, therefore, be handled carefully. The manufacturer of your MINI recommends having your MINI dealer per-form any work that you do not feel competent to perform yourself or that is not described here.Never touch the glass of new bulbs with your bare fingers, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or some thing similar, or hold the bulb by its base. <You can obtain a selection of replacement bulbs at your MINI dealer.When working on electrical systems, always begin by switching off the con-sumer in question; otherwise, short circuits could result. To avoid possible injury or equip-ment damage when replacing bulbs, observe any instructions provided by the bulb manufac-turer.<Caring for headlamps, refer to page 128.For any bulb replacement not described below, contact a MINI dealer or a work-shop that has specially trained personnel work-ing in accordance with the specifications of the MINI manufacturer. <For checking and adju sting headlamp aim, please contact your MINI dealer. <Light-emitting diodes LEDsLight-emitting diodes installed behind translu-cent lenses serve as the light sources for many of the controls and displays in your vehicle. These light-emitting diodes are related to conven-tional laser diodes, and legislation defines them as Class 1 light-emitting diodes.Do not remove the covers or expose the eyes directly to the unfiltered light source for several hours; otherwise, this could cause irritation of the retina. <

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.