MINIの取扱説明書・マニュアル [全176ページ 2.84MB]
ownersmanual2011countryman.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2011countryman.pdf - 2.84MB
- キャッシュ
9591view
176page / 2.84MB
59AT A GLANCE Reference Mobility Controls Driving tips Communicationsably distributes the driv e force to the front and rear axle depending on the driving situation and prevailing road conditions.Sport button*Pressing the button causes your MINI to respond even more sportily.>Engine responds more spontaneously to movements of the accelerator.>Steering response is more direct.>Cooper S: the engine sounds more sporty in coasting mode.With automatic transmission:>More rapid gear shifting in Sport program.Activating the systemPress the SPORT button.The LED lights up.SPORT is briefly displayed in the tachometer.Deactivating the system>Press the SPORT button again.>Switch off the engine.Flat Tire Monitor FTMThe conceptThe system does not measure the actual infla-tion pressure in the tires.The system detects a pressure loss in a tire by comparing the rotational speeds of the individ-ual wheels while moving.In the event of a pressure loss, the diameter and therefore the rotational speed of the corre-sponding wheel change. This is detected and reported as a flat tire.Functional requirementThe system must have been initialized while the tire inflation pressure was correct; otherwise, reliable signaling of a fl at tire is not ensured.Initialize the system after every correction of the tire inflation pressure and after every tire or wheel change.System limitationsSudden serious tire damage caused by external influences cannot be indicated in advance.<A natural, even pressure lo ss in all four tires can-not be detected. Therefore, check the tire infla-tion pressure regularly.In the following situations, the system could be delayed or malfunction:>System has not been initialized>Driving on snowy or slippery road surface>Performance-oriented style of driving: slip in the drive wheels, high lateral acceleration>Snow chains are attachedInitializing the systemThe initialization process adopts the set inflation tire pressures as refere nce values for the detec-tion of a flat tire. Initialization is started by con-firming the inflation pressures.Do not initialize the syst em when driving with snow chains.
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
33068 view
11935 view
43011 view
3545 view
28682 view
もっと見る