MINIの取扱説明書・マニュアル [全283ページ 9.38MB]
ownersmanual2012couperoadsterconvertible.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2012couperoadsterconvertible.pdf - 9.38MB
- キャッシュ
8456view
283page / 9.38MB
CONTROLS Driving68Cruise controlThe conceptCruise control is available at vehicle speeds of at least approx. 20 mph or 30 km/h. The car then stores and maintains the speed that you specify using the button on the steering wheel.Do not use cruise control when driving at constant speed is prevented by adverse conditions, e.g. winding roads, dense traffic or poor road conditions due to, e.g. snow, rain, ice or loose surfaces. Otherwise, you could lose con-trol of the vehicle and cause an accident as a result.<ActivatingDepending on the features with which your vehicle is equipped, you have one of the two buttons indicated 2 in your vehicle.1Resuming cruise control2Activating/deactivating cruise control3Maintaining, storing and increasing speed4Maintaining, storing and decreasing speedIndicator lamp in the speedometer lights up. The cruise control system is ready and can be activated.Activating/deactivating cruise controlPress button 2.The system is automati cally deactivated if:>Braking takes place>The clutch is engaged>The transmission is set on N>The stability control system is onCruise control is not deactivated by depressing the accelerator pedal. Once the accelerator pedal is released, the stored speed is achieved again and maintained.The stored speed is cleared when the ignition is switched off.Maintaining current speedPress button3.The system maintains and stores the current vehicle speed.If, on a downhill grade, the engine braking effect is not sufficient, the controlled speed may be exceeded. On uphill grades vehicle speed may drop if the engine output is insufficient.Increasing speedPress button3 repeatedly until the desired speed is reached. Every time you press the but-ton, the speed increases by approx. 1 mph or 1km/h.Accelerating using the buttonPress and hold button 3.The vehicle accelerates without pressure on the accelerator pedal. After the button is released, the driving speed is maintained and stored.Decreasing speedPress button4 repeatedly until the desired speed is reached.The functions here are the same as for increas-ing the speed or accelerating, except that the speed will be decreased.Resuming a speed stored beforehandPress button 1.The last speed stored is achieved again and maintained.The stored speed is cleared when the ignition is switched off.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
33125 view
11941 view
43055 view
3554 view
28692 view
もっと見る