MINIの取扱説明書・マニュアル [全283ページ 9.38MB]
ownersmanual2012couperoadsterconvertible.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2012couperoadsterconvertible.pdf - 9.38MB
- キャッシュ
8621view
283page / 9.38MB
Technology for driving comfort and safety CONTROLS 89Vibrations or loud noises while driving can indicate final failure of the tire. Reduce your speed and bring the vehicle to a stop; oth-erwise, pieces of tire may come off, which could result in an accident. Do not continue driving and contact your MINI dealer. <Tire Pressure Monitor TPMThe conceptMeasuring the inflation pressure in the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires.Functional requirementThe system must have been reset while the inflation pressure was correct; otherwise, reliable signaling of a fl at tire is not ensured.Always use wheels with TPM electronics to ensure that the system will operate properly.Reset the system again after each correction of the tire inflation pressure and after every tire or wheel change.System limitationsSudden, serious tire damage caused by external influences ca nnot be indicated in advance.<The system does not operate correctly if it has not been reset. For example, a flat tire may be indicated despite correct tire inflation pressures.The system is inactive and cannot indicate a flat tire:>If a wheel without TPM electronics, e.g. a compact spare wheel, is mounted.>Interference with TP M by other systems or devices with the same transmission frequency.Status displayThe current status of th e Tire Pressure Monitor can be displayed by the onboard computer, e.g. whether or not the TPM is activated.1."Vehicle Info"2."Vehicle status"3."Tire Pressure Monitor - TPM"The status is displayed.Status indicator on the onboard computerThe tire and system condit ion is indicated by the color of the tires.A change in the tire in flation pressure during driving is taken into account.A correction is only required when this is indicated by the TPM.Green wheelsThe inflation pressure corresponds to the desired state."TPM active" is displayed on the onboard computer.Gray wheelsThe system cannot detect a puncture.Reasons for this may be:>TPM is being reset.>Interference from systems or devices with the same transmission frequency.>Malfunction.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
33784 view
12136 view
43466 view
3622 view
28964 view
もっと見る