MINIの取扱説明書・マニュアル [全254ページ 4.62MB]
ownersmanual2012countryman.pdf
gizport - 2013-09-05
http://libraryofmotoring.info/.../ownersmanual2012countryman.pdf - 4.62MB
- キャッシュ
69229view
254page / 4.62MB
Technology for driving comfort and safety CONTROLS 73Flat Tire Monitor FTMThe conceptThe system does not measure the actual infla-tion pressure in the tires.The system detects a pre ssure loss in a tire by comparing the rotational speeds of the individ-ual wheels while moving.In the event of a pressure loss, the diameter and therefore the rotational speed of the corre-sponding wheel change. This is detected and reported as a flat tire.Functional requirementThe system must have be en initialized while the tire inflation pressure was correct; otherwise, reliable signaling of a fl at tire is not ensured.Initialize the system afte r every correction of the tire inflation pressure and after every tire or wheel change.System limitationsSudden serious tire damage caused by external influences ca nnot be indicated in advance. <A natural, even pressure loss in all four tires can-not be detected. Therefore, check the tire infla-tion pressure regularly.In the following situations, the system could be delayed or malfunction:>System has not been initialized>Driving on snowy or slippery road surface>Performance-oriented styl e of driving: slip in the drive wheels, high lateral acceleration>Snow chains are attachedStatus displayThe current status of the Flat Tire Monitor can be displayed on the Control Display, e.g. whether or not the FTM is active.1. "Vehicle Info"2. "Vehicle status"3. "Flat Tire Monitor"The status is displayed.Initializing the systemThe initialization process adopts the set inflation tire pressures as refere nce values for the detec-tion of a flat tire. Initia lization is started by con-firming the inflation pressures.Do not initialize the system when driving with snow chains.1. "Vehicle Info"2. "Vehicle status"3. "Reset"4. Start the engine, but do not start driving.5. Select "Reset" to start the initialization.6. Start to drive.The initialization is completed during driv-ing, which can be interrupted at any time. When driving resumes, the initialization is con-tinued automatically.<Indication of a flat tireThe warning lamps come on in yellow and red. A message appears on the Control Display. An acoustic signal also sounds.
参考になったと評価
17人が参考になったと評価しています。
その他の取扱説明書
32652 view
11800 view
42538 view
3464 view
28418 view
もっと見る