MINIの取扱説明書・マニュアル [全267ページ 2.77MB]
ownersmanual2013hardtopclubman.pdf
gizport - 2013-09-06
http://libraryofmotoring.info/.../ownersmanual2013hardtopclubman.pdf - 2.77MB
- キャッシュ
49376view
267page / 2.77MB
MOBILITY Replacing components22812.Unscrew the dust cap from the extension and place it on the valve of the space-saver spare tire.Due to its different dimensions, the dam-aged wheel cannot be placed in the recess for the space-saver spare tire. <MINI Clubman: removing the space-saver spare tireThe space-saver spare tire is located under the tire change set in the cargo area.1.Fold up the floor mat.2.Unscrew the nut, arrow, and remove the space-saver spare tire.Driving with the space-saver spare tireDrive cautiously and do not exceed a speed of 50 mph/80 km/h. Changes may occur in vehicle handling such as lower track sta-bility during braking, longer braking distances and changes in self-steering properties when close to the handling limit. These properties are more noticeable with winter tires. <Only one space-saver spare tire may be mounted at one time. Mount a wheel and tire of the original size as soon as possible, to avoid any safety risks. <Check the tire inflation pressure at the ear-liest opportunity and correct it if neces-sary. Replace the defective tire as soon as possi-ble and have the new wheel/tire assembly balanced.<Preparing for a tire changeObserve the safety precautions regarding flat tires on page224.<Additional safety measures when chang-ing tires: Only change the tire wh en parked on a surface that is level, firm and not slippery.The vehicle or the jack could slip sideways on soft or slippery support surfaces, such as snow, ice, flagstones, etc. Do not use a wooden block or similar object as a support base for the jack, as this would prevent it from extending to its full support height and reduce its load-carrying capacity. Do not lie under the vehicle or start the engine when the vehicle is supported by the jack; other-wise, there is a risk of fatal injury. <1.Place the foldable chock behind the front wheel on the other side of the vehicle or in front of the wheel if the vehicle is on an incline. If the wheel is changed on a surface with a more severe sl ope, take additional precautions to secure the vehicle from roll-ing.2.Uncover the lug bolts if necessary.3.Loosen the lug bolts by a half turn.Jacking up the vehicleThe vehicle jack is designed for changing wheels only. Do not attempt to raise another vehicle model with it or to raise any load of any kind. To do so could cause accidents and personal injury.<1.Place the jack at the jacking point closest to the wheel.
参考になったと評価
8人が参考になったと評価しています。
その他の取扱説明書
33125 view
11941 view
43055 view
3554 view
28692 view
もっと見る