1. 取扱説明書・マニュアル >
2. MINI >
3. 自動車 >
4. MINI の使い方、故障・トラブル対処法 >
5. MINI の取扱説明書・マニュアル

MINIの取扱説明書・マニュアル [全267ページ 2.77MB]

CONTROLS Technology for driving comfort and safety68Technology for driving comfort and safetyVehicle equipmentIn this chapter, all production, country, and optional equipment that is offered in the model range is described. Equi pment is also described that is not available because of, for example, selected options or coun try version. This also applies to safety relate d functions and systems.Park Distance Control PDCThe conceptPDC assists you with parking in reverse. Acoustic signals and a visual indi cator warn you of the presence of an object behind the vehicle. To measure the distance, there are four ultrasonic sensors in either bumper.These sensors have a range of approx. 6.5 ft/2 m. However, an acoustic warning does not sound until an object is approx. 24 in/60 cm from the rear corner sensors, or approx. 5 ft/1.50 m from the rear center sensors.PDC is a parking aid that can indicate objects when they are approached slowly, as is usually the case when parking. Avoid appr oaching an object at high speed; otherwise, physical circumstances may lead to the system warning being issued too late.<Automatic modeWith the engine running or the ignition switched on, the system is activated automatically after approx. 1 second when you engage reverse gear or move the automatic transmission selec-tor lever to position R. Wait this short period before driving.Acoustic signalsAs the distance between vehicle and object decreases, the intervals between the tones become shorter. If the distance to the nearest object falls to below roughly 1 ft/30 cm, then a continuous tone sounds.If the distance remains co nstant, e.g. when driv-ing parallel to a wall, the acoustic signal stops after approx. 3 seconds.MalfunctionIndicator lamp lights up. PDC has failed. A message appears on the Control Dis-play. Have the system checked.To avoid this problem, keep the sensors clean and free of ice or snow in order to ensure that they will continue to operate effectively. When using a high-pressure cleaner, do not direct the jet toward the sensors for lengthy periods and only spray from a distance of at least 4 in/10 cm.PDC with visual warningTo have the system show distances to objects on the Control Display. The contours of distant objects are shown on the Control Display even before the acoustic sign al sounds. The display appears on the Control Display as soon as the transmission is shifted into reverse or the selec-tor lever is moved into the R position.System limitationsEven with PDC, final responsibility for esti-mating the distance between the vehicle and any obstructions always remains with the driver. Sensors, too, have blind spots in which objects cannot be dete cted. Moreover, ultra-sonic detection can reach its physical limits with objects such as trailer tow bars and couplings, thin and wedge-shaped objects, etc. Low objects already indicated, such as curbs, may

もっと見る

このマニュアルの目次

Copyright © 2013 Gizport.jp All Rights Reserved.