X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123806.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123806.pdf - 4.65MB
- キャッシュ
21357view
126page / 4.65MB
Transporting children safely32of injury to children. Always read and follow the instructions that come with the system. Child seat securityAll of the rear belt retractors and the front pas-senger's safety belt can be locked for mounting and securing child-restraint systems.Information regarding this is located near the buckle latch of each safety belt.To lock the safety belt Pull the entire length of the belt from the belt retractor. Allow the reel to retract the belt somewhat and engage the buckle, then tighten the belt against the child-restraint system. The retraction mechanism is now locked. To unlock the safety beltRelease the buckle, remove the child-restraint system and allow the belt retractor to reel the belt completely in.Child-restraint system with tether strap If you use a child-restraint system with a tether strap, three additional tether anchorage points have been provided, refer to the arrows in the illustration. To gain access to this anchor fitting lift the plastic plug with the help of a screw-driver. Depending on the location selected for seating in the rear passenger area, attach the tether strap to the corresponding anchorage point to secure the child-restraint system, as shown in the illustration below. Routing of tether strapOuter seating positions:Route the tether strap through the center between the head restraint and the backrest.Center seating position:Fold the center armrest forward and pull the tether strap through the opening. Then fold up the center armrest and engage it.When using the cargo area cover: tether strap must run between the rear backrest and the cargo area cover.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
55227 view
26824 view
21503 view
23517 view
22754 view
もっと見る