X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123806.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123806.pdf - 4.65MB
- キャッシュ
20664view
126page / 4.65MB
Under the hood92sure to escape, then continue turning to open.3.The coolant level is correct if the upper end of the red float bar is at least at the same height as the top edge of the filler neck, refer to arrow. The bar end may only pro-trude by a maximum of ιin/2 cm, i.e. up to the second mark on the float bar, refer also to sketch beside the filler neck.4.If the coolant is low, slowly add coolant up to the specified level - do not overfill.5.Screw on the cap and tighten firmly.6.Have the reason for the coolant loss elimi-nated as soon as possible.Brake system Malfunction Brake fluid The warning lamp lights up red despite the handbrake being released: Stop immediately. The brake fluid in the reservoir has fallen to below the minimum level. At the same time, a considerably longer brake pedal travel may be noticeable. Have the system checked immedi-ately.During continued driving increased brake pedal pressure may be necessary, and considerably longer braking distances may result. Please adapt your driving style accord-ingly.< Display of the previously described malfunction on Canadian models.Brake pads The warning lamp lights up.The brake pads have reached their min-imum pad thickness. Have brake pads replaced immediately. For your own safety: use only brake pads that BMW has approved for your particu-lar vehicle model. As BMW cannot assess the suitability of other brake pads for use in your vehicle, we are unable to assume continued responsibility for the vehicle's operating safety if non-approved pads are installed. <
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
52709 view
25889 view
20805 view
22809 view
21915 view
もっと見る