X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123806.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123806.pdf - 4.65MB
- キャッシュ
20837view
126page / 4.65MB
Driving403.Move the wiper lever from position 0 to position 2 againTo change the wiper blades, refer to page 95.Cruise control* The vehicle maintains and stores the speed that you set as of a speed of approx. 20 mph/30 km/h. You can use cruise control whenever the sys-tem is active while the engine is running.On the sports steering-wheel* the buttons +/- for the cruise control are located on the right-hand side of the steering wheel.Indicator lamp The indicator lamp lights up green: System ready for operation using the buttons on the steering wheel.Activating systemAs of ignition key position 2: Press button on steering wheel; the indicator lamp in the instrument cluster comes on. You are able to use the cruise control.Do not use the cruise control under unfa-vorable conditions that do not permit a constant speed, e.g. when driving on winding roads or in heavy traffic or when negotiating poor road conditions such as snow, rain, ice, or a loose road surface. < Deactivating systemPress the button repeatedly until the indicator lamp in the instrument cluster goes out.The cruise control is also deactivated when the ignition key is turned to position 0. The speed stored in the memory is deleted in the process.Maintaining speed, storing, and acceleratingBriefly press + button:The system maintains and stores the current vehicle speed. Every time you briefly press the button, the vehicle's speed increases by roughly 1 mph/1 km/h.Press and hold + button:The vehicle accelerates without pressure on the accelerator pedal. When you release the button, the system maintains and stores the current speed.If, on a downhill gradient, the engine's braking effect is not sufficient, the con-trolled speed can be exceeded. Speed can drop on uphill grades if the engine output is insuffi-cient.< DeceleratingBriefly press - button:Every time you briefly press the button, the vehicle's speed decreases by roughly 1 mph/1 km/h provided that you have already activated the cruise control.Press and hold - button:With the cruise control active, the system auto-matically reduces the fuel supply to slow the vehicle. When you release the button, the sys-tem maintains and stores the current speed.Interrupting cruise controlWhen the system is activated, press button 1. The indicator lamp stays on. You can use the cruise control again whenever required by requesting the speed that was stored last.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
53119 view
26085 view
20989 view
23008 view
22105 view
もっと見る