X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123806.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123806.pdf - 4.65MB
- キャッシュ
20837view
126page / 4.65MB
ReferenceAt a glanceControlsDriving tipsMobility 47MalfunctionThe indicator lamp in the button flashes and a short continuous tone sounds. PDC is malfunc-tioning. Switch off PDC. Have the system checked. To prevent this problem, keep the sensors clean and free of ice or snow in order to ensure that they will continue to operate effectively. System limitsEven with PDC, final responsibility for estimating the distance between the vehicle and any obstructions always remains with the driver. Even when sensors are involved, there is a blind spot in which objects cannot be detected. The system is also subject to the physical limits that apply to all forms of ultra-sonic measurement, such as those encoun-tered with tow bars and trailer couplings, or thin and wedge-shaped objects etc. Low objects already displayed, e.g. a curb, can also disap-pear from the detection area of the sensors again before a continuous tone sounds.Loud sources of sound, inside and outside the vehicle, could drown out the PDC signal tone. < Keep the sensors clean and free of ice or snow in order to ensure that they will con-tinue to operate effectively.Do not apply high pressure spray to the sensors for a prolonged period of time. Keep the spray at least 4 in/10 cm away from the sensors. < Driving stability control systems Your BMW is equipped with an extended array of systems designed to enhance and maintain vehicle stability under extreme conditions. ABS Antilock Brake System ABS prevents the wheels from locking during braking. Safe steering response is maintained even during full braking. This results in an increase in the active safety.ABS is operational every time you start the engine. Safe braking, refer to page 73.EBV Electronic brake-force distribution EBV controls the brake system's application pressure in the rear wheels to ensure stable deceleration.DBC Dynamic Brake Control When the brake pedal is depressed quickly, this system automatically generates a maximal braking force distribution and thus helps keep the braking distance to a minimum during full braking. This system exploits all of the benefits provided by ABS.Do not reduce the pressure on the brake pedal for the duration of the brake application. DBC is deactivated when you release the brake pedal.DSC Dynamic Stability Control DSC prevents slip at the drive wheels when starting off and accelerating. DSC also detects unstable driving conditions, such as a fishtailing of the vehicle's rear end or the sliding of the vehicle on its front wheels. In these circum-stances, DSC helps keep the vehicle on a safe path, within physical limits, by reducing engine output and by applying the brakes in individual wheels.The DSC is operational every time you start the engine.The laws of physics cannot be repealed, even with DSC. An appropriate driving style always remains the responsibility of the driver. Therefore, do not reduce the additional safety margin again by taking risks. < Indicator lamp The indicator lamp goes out shortly after the engine starts.When the indicator lamp flashes:DSC is controlling the drive and braking forces. When the indicator lamp stays lit:DSC has been switched off with the button.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
53119 view
26085 view
20989 view
23008 view
22105 view
もっと見る