X3の取扱説明書・マニュアル [全126ページ 4.65MB]
123806.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123806.pdf - 4.65MB
- キャッシュ
21061view
126page / 4.65MB
Replacing components98lead to personal injury should the bulb be dam-aged.< 1.Pull the cover in front of the fog lamp for-ward. 2.Loosen the screws, refer to arrow, and pull out the headlamp. 3.Turn the lamp base at the back of the head-lamp to the left and remove it. 4.Replace the bulb. Tail lamps 21 watt bulb 1Turn signal 2Backup lamp 3Tail lamp/brake lamp 4Tail lamp/brake lamp* Replacing tail lamps 1.Open the flap in the side panel, refer to page68.2.To release the plug connection of the cable, press the spring, refer to arrow 1.3.Lift the side panel somewhat.4.To remove the back panel of the lamp, release the retainer, refer to arrow 2.5.Apply gentle pressure to the bulb fitting while turning it to the left for removal and replacement.6.Install in the reverse order.Lamps in the tailgate Please contact your BMW Sports Activity Vehicle Center. License plate lamps 10 watt bulb 1.Press the lamp out to the side with a screw-driver. 2.Remove the lamp and replace the bulb. Tailgate lamp 5 Watt bulb 1.Pull off the bulb holder.2.Replace the bulb.LEDs light-emitting diodes Light-emitting diodes installed behind translu-cent lenses serve as the light source for many of the controls and displays in your vehicle. These light-emitting diodes are related to ordinary lasers.
参考になったと評価
5人が参考になったと評価しています。
その他の取扱説明書
53910 view
26349 view
21216 view
23259 view
22378 view
もっと見る