X3の取扱説明書・マニュアル [全139ページ 4.74MB]
123809.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123809.pdf - 4.74MB
- キャッシュ
22406view
139page / 4.74MB
ReferenceAt a glanceControlsDriving tipsMobility 43Cruise control*The vehicle maintains and stores the speed that you set at speeds greater than approx. 20 mph/30 km/h.You can use cruise control whenever the sys-tem is active while the engine is running.Do not use the cruise control under unfa-vorable conditions that do not permit a constant speed, e.g. when driving on winding roads or in heavy traffic or when negotiating poor road conditions such as snow, rain, ice, or a loose road surface. Otherwise, you could lose control of the vehicle and cause an accident. <Indicator lampThe indicator lamp lights up green: sys-tem ready for operation using the but-tons on the steering wheel.Activating systemWith ignition key in position 2 or higher: Press button on steering wheel; the indicator lamp in the instrument cluster comes on. The cruise control mode is enabled.Deactivating systemPress the button repeatedly until the indicator lamp in the instrument cluster goes out.The cruise control is also deactivated when the ignition key is turned to position 0. The speed stored in the memory is deleted in the process.Maintaining speed, storing, and acceleratingBriefly press + button:The system maintains and stores the current vehicle speed. Each additional touch of the but-ton increases the speed by approx. 1 mph/1km/h.Press and hold + button:The vehicle accelerates without pressure on the accelerator pedal. When you release the button, the system maintains and stores the current speed.If the braking action of the engine is insufficient on a downhill stretch, then the set vehicle can exceed the set speed. Speed can drop on uphill grades if the engine output is insufficient.DeceleratingBriefly press - button:Each press of the button decreases the vehi-cle's speed by roughly 1 mph/1 km/h, provided that you have already activated the cruise con-trol.Press and hold - button:With the cruise control active, the system auto-matically reduces the fuel supply to slow the vehicle. When you release the button, the sys-tem maintains and stores the current speed.Interrupting cruise controlWhen the system is activated, press the button. The indicator lamp stays on. You can use the cruise control again whenever required by requesting the speed that was stored last.In addition, the system is automatically inter-rupted in response to the following conditions:>When you apply pressure to the brake pedal>When you apply pressure to the clutch pedal or when you move the automatic transmission selector lever from D to N>If you exceed or fall below the set speed for an extended period, by pressing the accel-erator, for example>When DSC is activated
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
54139 view
26385 view
21080 view
21235 view
23278 view
もっと見る