Z4の取扱説明書・マニュアル [全248ページ 7.63MB]
123860.pdf
gizport - 2013-09-07
http://153.127.246.254/.../123860.pdf - 7.63MB
- キャッシュ
31662view
248page / 7.63MB
Under the hood200>"Measurement inactive. Have this checked."Do not add engine oil. You can continue your journey. Note the newly calculated dis-tance remaining to the ne xt oil service, refer to page69. Have the system checked as soon as possible.Adding engine oilDo not add 1 US quart/1 liter of engine oil until a corresponding message is shown on the Con-trol Display.Add oil within the next 125 miles/200 km; otherwise, the engine damage could occur.<Keep oils, greases, etc. out of the reach of children and comply with the relevant warnings on the containers. Otherwise, health hazards may result. <Oil changeHave oil changed only at your BMW center or at a workshop that works according to BMW repair procedures with correspondingly trained personnel.Specified engine oilsThe quality of the engine oil selected has critical significance for the oper ation and service life of an engine. BMW continuously approves spe-cific oils after confirming their suitability for use in its vehicles with extensive testing.Do not use oil additives as these may cause engine damage. <Only use approved BMW High Performance Synthetic Oil.If BMW High Performance Synthetic Oil is not available, you can add small quantities of other synthetic oils in betwee n oil changes. Only use oils with the API SM sp ecification or higher.Your BMW center will be glad to answer any questions regarding BMW High Performance Synthetic Oil or approved syn-thetic oils.<You can also call BMW of North America at 1-800-831-1117 or visit the website www.bmwusa.com to obtain this information.Viscosity ratingsViscosity is a measure of an oil's flow rating and is categorized in SAE classes.Selecting the appropri ate SAE class depends on the regional climatic conditions in which you normally drive your BMW.Approved oils belong to the 0W-40, 0W-30, 5W-40 and 5W-30 SAE classes.<These oils can be used fo r driving at all outside temperatures.CoolantDo not add coolant to the cooling system when the engine is hot. Escaping coolant can cause burns.<Coolant consists of half water and half additive. Not all commercially available additives are suit-able for your BMW. Ask your BMW center for suitable additives.Only use suitable ad ditives, otherwise engine damage may result. Because additives are harmful to your health, it is impor-tant to follow the instructions on the con-tainers.<Comply with the appropriate environ-mental protection regulations when dis-posing of coolant additives. <
参考になったと評価
8人が参考になったと評価しています。
その他の取扱説明書
38351 view
31138 view
13905 view
21365 view
21069 view
もっと見る