Aspire 3820の取扱説明書・マニュアル [全10ページ 0.18MB]
3
1.Test Item: Drop Test P.10/102.Test Purpose: This test simulates the drop of the packaging during transport.3.Test Procedure: Number of Test Samples (Per design type, Manufacturer ) and Drop Orientation For other than flat drops the centre of gravity must be vertically over the point of impact. Where more than one orientation is possible for a given drops, the orientation most likely to result in failure of the packaging must be used. Five (one for each drop) First drop: flat on the bottom Second drop: flat on the top Third drop: flat on the long side Fourth drop: flat on the short side Fifth drop: on a corner SANYO Internal Procedure: Packaging: Fiberboard boxes. Number of test samples: Five(one for each drop). It may do the drop of five orientations with one sample if the packing does not have the big damage. Drop orientation: As above.4.Test Requirements: A Package passes the test if it meets the following criteria: Each package is capable of withstanding a 1.2 meter drop test in any orientation without damage to cells cell) contact and without release of contents.5.Test Date: 2010/1/266.Test Data: PASS(Drop height 1.2m)6-1. No any package crack6-2. No any cell damege and battery damage.6-3. No any out side release of contents from shipping box6-4. No any contact between battery and battery, cell and cell.Packaging size:539*334*118mmPackaging weight (before):7.05kgPackaging weight (after):7.05kgUN Test Data (Model:3UR18650-2-T0627) Reconstituted wood boxes or batteries contained therein, without shifting of the contents so as to allow battery to battery (or cell to Fibreboard boxes Plastic boxes Steel or aluminum boxes which are in the shape of a box.Drop orientation Packaging Number of testsamples Boxes of natural wood Plywood boxes Composite PackagingsSANYO confidential Copyright (c) 2008, Sanyo Electric Co., Ltd.
