Aspire 3820
x
Gizport

Aspire 3820の取扱説明書・マニュアル [全10ページ 0.18MB]

3
101756.pdf
Swan2911 - 2013-08-16
http://153.127.246.254/.../101756.pdf - 0.18MB - キャッシュ
3401view
10page / 0.18MB
Share (facebook)
7 / 10 ページ
 
7 / 10 ページ
ファイルを開く
現在のページURL
UN Test Data (Model:3UR18650-2-T0627)1.Test Item: External short circuit (T5)P.7/102.Test Purpose: This test simulates an external short circuit.3.Test Procedure: The cell or battery to be tested shall be temperature stabilized so that its external case temperature reaches 55+-2 ℃ and then the cell or battery shall be subjected to a short circuit condition with a total external resistance of less than 0.1ohm at 55+-2 ℃.This short circuit condition is continued for at least one hour after the cell or battery external case temperature has returned to 55+-2 ℃. The cell or battery must be observed for a further six hours for the test to be concluded. SANYO Internal Procedure: As above.4.Test Requirements: External temperature of test batteries does not exceed 170 ℃ and there is no disassembly,no rupture and no fire within six hours of this test.5.Test Date: 2010/1/21-2010/1/226.Test Data1 0 PASS2 0 PASS3 0 PASS4 0 PASS5 0 PASS6 0 PASS7 0 PASS8 0 PASS9 0 PASS10 0 PASS11 0 PASS12 0 PASS13 0 PASS14 0 PASS15 0 PASS16 0 PASSNotes: D-Disassembly, R-Rupture, F-Fire, 0-No disassembly, no rupture & no fireAfter 50cyclesending infullydischargedstates54.754.354.654.354.954.7After 50cyclesending infullychargedstates54.854.654.654.3 At firstcycle,infullychargedstates54.9PASS54.754.954.8At firstcycle,infullydischargedstates54.954.7Battery No. Maximum temperature (5C)OthereventResult Judgement

参考になったと評価
  3人が参考になったと評価しています。

その他の取扱説明書
3142 view
4815 view
39472 view
878 view
919 view
もっと見る

このマニュアルの目次

  • 1 .
    (Manual of Tests and Cri...
    (Manual of Tests and Criteria ST/SG/AC.10/11/Rev.5, PartIII,sub-section 38.3)5.4 gAS10B3EJan.27.2010Nominal voltageWatt-hour rating Lithium ion battery Specification:::Customer Model For battery onlyFor cell onlyE1003874PassPassPassPassPassPassPass−S...
  • 2 .
    5.4 gAS10B3EJan.27.2010N...
    5.4 gAS10B3EJan.27.2010Nominal voltageWatt-hour rating Lithium ion battery Specification:::Customer ModelE1003874Sanyo Product CodeSanyo ModelF138607853UR18650-2-T0627Certificate of Package Drop Test for Lithium ion battery11.1 V67 Wh
  • 3 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Altitude simulation (T1)P.3/102.Test Purpose: This test simulates air transport under low-pressure conditions.3.Test Procedure: Test cells and batteries shall be stored at a pressure of 11.6kPa ...
  • 4 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Thermal Test (T2)P.4/102.Test Purpose: This test assesses cell and battery seal integrity and internal electrical connections. The test is conducted using rapid and extreme temperature changes....
  • 5 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Vibration (T3)P.5/102.Test Purpose: This test simulates vibration during transport.3.Test Procedure: Cells and batteries are firmly secured to the platform of the vibration machine without distor...
  • 6 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Shock (T4)P.6/102.Test Purpose: This test simulates possible impacts during transport.3.Test Procedure: Test cells and batteries shall be secured to the testing machine by means of a rigid mount ...
  • 7 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: External short circuit (T5)P.7/102.Test Purpose: This test simulates an external short circuit.3.Test Procedure: The cell or battery to be tested shall be temperature stabilized so that its exter...
  • 8 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Impact (T6) P.8/102.Test Purpose: This test simulates an impact.3.Test Procedure: The test sample cell or component cell is to be placed on a flat surface. A 15.8mm diameter bar is to be placed ac...
  • 9 .
    UN Test Data (Mod...
    UN Test Data (Model:3UR18650-2-T0627)1.Test Item: Overcharge (T7)P.9/102.Test Purpose: This test evaluates the ability of a rechargeable battery to withstand an overcharge condition.3.Test Procedure: The charge current shall be twice the manufact...
  • 10 .
    1.Test Item: Drop Test P....
    1.Test Item: Drop Test P.10/102.Test Purpose: This test simulates the drop of the packaging during transport.3.Test Procedure: Number of Test Samples (Per design type, Manufacturer ) and Drop Orientation For other than flat drops the centre ...