1812-1. Driving procedures2When drivingCT200h_U (OM76004U)nOperation of the air conditioning system in Eco drive mode (without navigation system)Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel efficiency. ( →P. 286) To improve air condi-tioning performance, adjust the fan speed or turn off Eco drive mode.nOperation of the air conditioning system in Eco drive mode (with navigation sys-tem)Eco drive mode controls the heating/cooling operations and fan speed of the air conditioning system to enhance fuel effici ency. To improve air conditioning perfor-mance, adjust the fan speed or turn off Eco drive mode. (Refer to the "Navigation System Owner's Manual".)nFor the shift positionslWhen the "POWER" switch is off, the shift position cannot be changed.lWhen the "POWER" switch is in ON mode (the hybrid system is not operating), the shift position can only be changed to N.lWhen the "READY" indicator is on, the sh ift position can be changed from P to D, N or R.lThe shift position can only be changed to B directly from D.In addition, if the shift position is change d in any of the following situations, the buzzer will sound and the shifting operation will be disabled or the shift position will automatically change to N. When this happens, select an appropriate shift position.l Situations where the shifting operation will be disabled:* When the shift position is changed from P to another position without depressing the brake pedal.* When the shift position is changed from P or N to B.l Situations where the shift position will automatically change to N:* When the P position switch is pressed while the vehicle is running.** When shift position R is selected when the vehicle is moving forward.* When shift position D is selected when the vehicle is moving in reverse.* When the shift position is changed from R to B.*: Shift position may be changed to P when driving at extremely low speeds.
