X3の取扱説明書・マニュアル [全144ページ 4.54MB]
123812.pdf
gizport - 2013-09-06
http://153.127.246.254/.../123812.pdf - 4.54MB
- キャッシュ
7723view
144page / 4.54MB
ReferenceAt a glanceControlsDriving tipsMobility 25Moving manually*In the event of an electrical malfunction, you can move the sunroof manually.1. Pull the cover firmly downward to remove.2. Take the Allen wrench* from the compart-ment under cargo area floor, refer to page 116 , and insert it into the opening pro-vided. Move the sunr oof into the desired position. The arrow in the illustration indi-cates the rotation direction for closing the sunroof.Alarm system*The conceptThe vehicle alarm system responds:>When a door, the hood, or the liftgate is opened.>To movements inside the vehicle: interior motion sensor, refer to description below.>When the car's inclination changes, for instance if an attempt is made to jack it up and steal the wheels or to raise it prior to towing away.>To interruptions in battery voltage.The alarm system signals unauthorized manip-ulations for a short time by:>Sounding an acoustic alarm>Switching on the hazard warning flashers>Flashing the high beamsArming and disarming alarm systemWhen you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time.If the alarm system has been properly armed, the hazard warning flashers light up once.You can have different confirmation sig-nals set to confirm arming and disarm-ing. <You can open the liftgate even when the system is armed by using the button of the remote control, refer to page 20 . When the liftgate is closed, it is locked again and monitored.Switching off alarm>Unlock the vehicle usin g the remote control, refer to page19 .>Turn the ignition key to position 1.Indicator lamp displays>The indicator lamp belo w the interior rear-view mirror flashes continuously: the sys-tem is armed.>The indicator lamp flashes after the vehicle is locked: doors, hood, or liftgate are not properly closed. Even if you do not close the alerted area, the system begins to monitor the remaining areas, and the indicator lamp flashes continuously after approx. 10 sec-
参考になったと評価
6人が参考になったと評価しています。
その他の取扱説明書
53362 view
26180 view
20898 view
21055 view
23076 view
もっと見る